RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 768 views
Scorpion Power Scorpion Power
Helicopter
e-
Scorpion Electric Components
› Scorpion 2221-8 v1
03-16-2009 02:56 PM  8 years agoPost 1
Superior

rrNovice

Norfolk Va

My Posts: All  Forum  Topic

ok people i have a problem the motor making a clicking noise real bad in flight a frined told me its the bearing got new bearings install an still making that noise so i found out what the problem was after(a week)one of the 6 magnet on the inside of the motor so i would like to kno have anyone have had that same problem also how could i fix it

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
03-16-2009 03:18 PM  8 years agoPost 2
Heli 770

rrProfessor

USA.

My Posts: All  Forum  Topic

Send it in to Innov8tive Designs for repairs. Its not easy to epoxy the magnet back in. The poles of the magnet has to be in the right orientation and it needs to be balanced.

PM  EMAIL  Attn:RR  Quote
03-16-2009 03:44 PM  8 years agoPost 3
Superior

rrNovice

Norfolk Va

My Posts: All  Forum  Topic

have you ever heard of that happening before

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
03-16-2009 03:59 PM  8 years agoPost 4
Heli 770

rrProfessor

USA.

My Posts: All  Forum  Topic

Yes, and not only the Scorpion motor. Normally the magnets gets dislodged in a crash or dropped on a hard floor.

PM  EMAIL  Attn:RR  Quote
03-16-2009 08:30 PM  8 years agoPost 5
Ktbone

rrApprentice

NH

My Posts: All  Forum  Topic

If you want to try it yourself:
http://www.scorpionsystem.com/build...ild_and_review/

If you don't know where you are going any road will take you there.

PM  EMAIL  Attn:RR  Quote
03-16-2009 09:01 PM  8 years agoPost 6
Superior

rrNovice

Norfolk Va

My Posts: All  Forum  Topic

it dosent say what glue or epoxy to use

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
03-16-2009 09:05 PM  8 years agoPost 7
Ktbone

rrApprentice

NH

My Posts: All  Forum  Topic

"I glued them with a 200°C rated 2-component gluing system. You can also use loctite 638 or 648 to get a high resilent connection."

If you don't know where you are going any road will take you there.

PM  EMAIL  Attn:RR  Quote
03-16-2009 09:10 PM  8 years agoPost 8
Ktbone

rrApprentice

NH

My Posts: All  Forum  Topic

J-B Weld will fit the bill no problem it's rated to 315*C.

If you don't know where you are going any road will take you there.

PM  EMAIL  Attn:RR  Quote
03-16-2009 10:38 PM  8 years agoPost 9
Superior

rrNovice

Norfolk Va

My Posts: All  Forum  Topic

im gonna try that jb weld tonite

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
WATCH
 1 page 768 views
Scorpion Power Scorpion Power
Helicopter
e-
Scorpion Electric Components
› Scorpion 2221-8 v1
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Wednesday, November 22 - 7:18 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online