RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 5206 views
Scorpion Power Scorpion Power
Helicopter
e-
Blade
Blade 400 › 3D How to use the bind plug to receiver
03-15-2009 09:35 PM  8 years agoPost 1
Ausable

rrVeteran

Montreal, Quebec

My Posts: All  Forum  Topic

I made some radio changes and want to bind it to the helicopter. When You make any changes on the radio settings is this what I need to do. If so can someone explain to me how to do this. I looked in the book but I am not to sure how to do it. This would be my first time. Can someone help me out Thanks for helping out

PM  EMAIL  GALLERY  Attn:RR  Quote
03-15-2009 09:39 PM  8 years agoPost 2
cstoneman

rrApprentice

Colorado

My Posts: All  Forum  Topic

Did you already bind it to the radio?

If so, you don't have to bind again when you change setup on the same model memory position.

If you use a new model memory, you do need to bind again.

As far as how, we would need to know what radio, and what heli.

PM  EMAIL  Attn:RR  Quote
03-15-2009 09:39 PM  8 years agoPost 3
Wingman77

rrProfessor

Pulaski Tennessee

My Posts: All  Forum  Topic

yes to make sure your fail safe is correct, just plug the bind plug into your battery port on your receiver then turn on the receiver. the lights on the receiver should be blinking and then you hold the bind switch on your radio and turn the radio on and continue holding the switch until the lights on the receiver go solid.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
03-15-2009 09:45 PM  8 years agoPost 4
Ausable

rrVeteran

Montreal, Quebec

My Posts: All  Forum  Topic

How to use the bind plug to receiver

What I did was made a copy of the original seeting of Model 1 and copy it to Model 2, Then I made all the new changes in model2. This was I keep all the original settings in model 1.
So now i need to bind but not sure how to do it.I have the small bind plug but I need step by step instructions so that i don't mess it up.

Thanks

PM  EMAIL  GALLERY  Attn:RR  Quote
03-15-2009 09:46 PM  8 years agoPost 5
Ausable

rrVeteran

Montreal, Quebec

My Posts: All  Forum  Topic

How to use the bind plug to receiver

Also where is the area that I plung in the bind plug to the receiver?
Thanks Guys

PM  EMAIL  GALLERY  Attn:RR  Quote
03-15-2009 09:55 PM  8 years agoPost 6
Wingman77

rrProfessor

Pulaski Tennessee

My Posts: All  Forum  Topic

I already told you everything you need to know but if you want i will walk you thru it just pm me and give me your phone number.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
03-16-2009 12:43 AM  8 years agoPost 7
30636086

rrKey Veteran

Tacoma, WA

My Posts: All  Forum  Topic

Watch at YouTube

I dont suffer from mental iIlness, I actually enjoy mine!

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 5206 views
Scorpion Power Scorpion Power
Helicopter
e-
Blade
Blade 400 › 3D How to use the bind plug to receiver
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Saturday, November 18 - 10:27 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online