RunRyder RC
 7  Topic Subscribe
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 3779 views POST REPLY
HelicopterFuel-Helicopters New or Limited ActivityJS › Tips And Tricks TZ Frenzy V2
06-02-2009 08:17 AM  8 years agoPost 21
AndriykarrNovice - Kyiv, Ukraine - My Posts: All  Forum  Topic

Elevator arm clings a tail pullley gear
Has corrected small grinding of an upper edge of a gear wheel (see pictures)

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-02-2009 09:00 AM  8 years agoPost 22
twitch

rrKey Veteran

Las Vegas

My Posts: All  Forum  Topic

Use the Raptor blade spindle shim between grip and dampner this will tighten up that loose head, there are two spacers in there now. The aluminum one piece spacers works great.Stock is two small shims different thickness. The raptor one is 1.53mm The stock one is thinner and one is thicker not much but need to be even.
have a link for these?
thanks

PM  EMAIL  GALLERY  Attn:RR  Quote
06-04-2009 12:22 AM  8 years agoPost 23
ruddernate

rrKey Veteran

sulphur,Ok.

My Posts: All  Forum  Topic

http://www.heliproz.com/prodinfo.asp?number=133645

sorry it's spindle and all but it's cheap and if you're like me you can always put the spindle in your old beater rappy.

fly it like you stole it

PM  EMAIL  GALLERY  Attn:RR  Quote
06-04-2009 12:24 AM  8 years agoPost 24
twitch

rrKey Veteran

Las Vegas

My Posts: All  Forum  Topic

thanks ruddernate!

PM  EMAIL  GALLERY  Attn:RR  Quote
06-04-2009 01:33 AM  8 years agoPost 25
ruddernate

rrKey Veteran

sulphur,Ok.

My Posts: All  Forum  Topic

no problem. i'm learning from you guys. tracking says my new frenzy will be here tomorrow.

fly it like you stole it

PM  EMAIL  GALLERY  Attn:RR  Quote
06-04-2009 02:03 AM  8 years agoPost 26
twitch

rrKey Veteran

Las Vegas

My Posts: All  Forum  Topic

Mine came today. For $195 this is pretty darn good quality. I was expecting something cheap but this is really nice I like the design alot more then my T-rex 600

PM  EMAIL  GALLERY  Attn:RR  Quote
06-04-2009 02:25 AM  8 years agoPost 27
ruddernate

rrKey Veteran

sulphur,Ok.

My Posts: All  Forum  Topic

you're killing me. i'm like a kid waiting on Christmas

fly it like you stole it

PM  EMAIL  GALLERY  Attn:RR  Quote
06-04-2009 02:32 AM  8 years agoPost 28
twitch

rrKey Veteran

Las Vegas

My Posts: All  Forum  Topic

lol, yea tell me about it. I was looking out the window all day waiting for the UPS guy to come!

EDIT: after putting some of this together it looks more like a 90, Compaired to my trex 500 from canopy to tail is 15" longer.

PM  EMAIL  GALLERY  Attn:RR  Quote
06-04-2009 03:22 AM  8 years agoPost 29
ruddernate

rrKey Veteran

sulphur,Ok.

My Posts: All  Forum  Topic

i was doing it today thinking by some rare chance that ups might be early.

fly it like you stole it

PM  EMAIL  GALLERY  Attn:RR  Quote
06-16-2009 09:00 AM  8 years agoPost 30
twitch

rrKey Veteran

Las Vegas

My Posts: All  Forum  Topic

Im gonna upgrade the clutch and clutch bell in this. Wich clutch bell is compatable, The raptor 30 or 50. I went to order one and I see they are different. Also is there an aftermarket bell for the raptor.

Also for the fan is this the rite part number QUKRD-08B.

Thanks

PM  EMAIL  GALLERY  Attn:RR  Quote
09-08-2009 04:42 AM  8 years agoPost 31
bigwolf1

rrVeteran

USA

My Posts: All  Forum  Topic

lower frame brace.
here is the part number for the frame brace JSS-1619
This will help keep the lower frames from breaking in a hard landings. Since the skid brace holes aren't centered in the frames this will keep frames from flexing and breaking below the tank.

MAH blade Rep
Trex700LE
Magnum fuels

PM  EMAIL  GALLERY  Attn:RR  Quote
09-08-2009 05:17 AM  8 years agoPost 32
w12martin

rrVeteran

Chengdu, Sichuan, China

My Posts: All  Forum  Topic

My kit came with that lower frame brace. The tail boom suports are fixed not in the upper frame brace but in the lower, according to the instructions manual.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
09-08-2009 05:41 AM  8 years agoPost 33
bigwolf1

rrVeteran

USA

My Posts: All  Forum  Topic

I had to drill the frames for mine. I'm supposed to have one of the new kits. that was something I metioned to js already but I guess the kits that Amain got last shipment didn't have these latest updates.

MAH blade Rep
Trex700LE
Magnum fuels

PM  EMAIL  GALLERY  Attn:RR  Quote
09-08-2009 06:05 AM  8 years agoPost 34
w12martin

rrVeteran

Chengdu, Sichuan, China

My Posts: All  Forum  Topic

I see!! My two kits are from the first batch produced by JSModel.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 3779 views POST REPLY
HelicopterFuel-Helicopters New or Limited ActivityJS › Tips And Tricks TZ Frenzy V2
 Print TOPIC  Make Suggestion 

 7  Topic Subscribe

Monday, May 28 - 4:34 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online