RunRyder RC
 5  Topic Subscribe
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 2637 views
Scorpion Power Scorpion Power
Helicopter
e-
Mikado
Logo 600 › Logo 600 upgrade Tail pitch Slider
03-17-2009 05:28 AM  8 years agoPost 21
Griffo

rrVeteran

Melbourne /​Canberra, Australia

My Posts: All  Forum  Topic

Not too sure about the Raptor version since I don't have a raptor. Perhaps someone else could confirm?

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
03-17-2009 05:42 AM  8 years agoPost 22
helicraze

rrElite Veteran

Victoria - Australia

My Posts: All  Forum  Topic

Hey i got my 3 in the mail (1 is spare), I will pull it apart tonight and check grease and loctite. Will measure the arms to see if there is difference.
Looks stronger for sure. Hope i don't bend the hub, i did not see it listed seperately.

PM  EMAIL  GALLERY  Attn:RR  Quote
03-17-2009 06:50 AM  8 years agoPost 23
Terrabit

rrElite Veteran

Seattle, WA - USA

My Posts: All  Forum  Topic

Sorry about your little balls Griffo. The last time I crashed, I had a similar sensation. I could almost feel them shrink. Hopefully I'll get some bigger balls from Esprit if they ever decide to hold, uh ... carry them. I'd like to get my balls with some tail, I mean with the tail, when I order it ... the Quick UK tail, from Esprit. I hear those are some hot tails! This time of the year in Seattle we don't see a lotta hot tail. In fact we really don't see any tail until June at the soonest. Makes me want to move back to Cali. I digress.

Thanks for the information. I think I've made my descision. I'm moving to Cali.

PM  EMAIL  Attn:RR  Quote
03-17-2009 06:57 AM  8 years agoPost 24
OICU812

rrMaster

Edson, Alberta,​Canada

My Posts: All  Forum  Topic

helicraze the Quick UK 600 t-rex hub is identical to this one. Terra that was alot of talk about your balls right there.

...Once upon a time there were Nitros, flybars and frequency pins...

PM  EMAIL  GALLERY  Attn:RR  Quote
03-17-2009 07:17 AM  8 years agoPost 25
Terrabit

rrElite Veteran

Seattle, WA - USA

My Posts: All  Forum  Topic

True. But, to be fair, there was also a good bit of tail talk to balance things out.

PM  EMAIL  Attn:RR  Quote
03-17-2009 11:56 PM  8 years agoPost 26
helicraze

rrElite Veteran

Victoria - Australia

My Posts: All  Forum  Topic

Well I'm glad i pulled them apart, not a drop of loctite i could visibly see, its was still tight, lots of grease on the thrust bearings.
It seems the arms are not offset you must turn in the tail rod end 4 complete turns to keep your 7-8deg at centre position (initial gyro position).
I had to reprogram the spartan and I ended up with just under 2MM gap at the end in travel adjust to keep it from locking up.

I decided to get the black ones so it looks standard, will test it out today.
Also due to the offset not being there i think in one direction there is less pitch available as there previously was.
I hope it will not cause problems for holding etc.

PM  EMAIL  GALLERY  Attn:RR  Quote
03-17-2009 11:59 PM  8 years agoPost 27
OICU812

rrMaster

Edson, Alberta,​Canada

My Posts: All  Forum  Topic

I run 4 of them no issue on hold, there is as much defelction when you look at the angle of the blades. On the boom side I have about 3-4mm of clearnace to avoid any overlock, a couple mm on the tr side.

...Once upon a time there were Nitros, flybars and frequency pins...

PM  EMAIL  GALLERY  Attn:RR  Quote
03-18-2009 12:13 AM  8 years agoPost 28
Griffo

rrVeteran

Melbourne /​Canberra, Australia

My Posts: All  Forum  Topic

Sorry about your little balls Griffo. The last time I crashed, I had a similar sensation. I could almost feel them shrink. Hopefully I'll get some bigger balls from Esprit if they ever decide to hold, uh ... carry them. I'd like to get my balls with some tail, I mean with the tail, when I order it ... the Quick UK tail, from Esprit. I hear those are some hot tails! This time of the year in Seattle we don't see a lotta hot tail. In fact we really don't see any tail until June at the soonest. Makes me want to move back to Cali. I digress.

Thanks for the information. I think I've made my descision. I'm moving to Cali.
LOL , GOLD!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
03-18-2009 03:48 AM  8 years agoPost 29
Terrabit

rrElite Veteran

Seattle, WA - USA

My Posts: All  Forum  Topic

Always happy to make a fool of myself.

PM  EMAIL  Attn:RR  Quote
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 2637 views
Scorpion Power Scorpion Power
Helicopter
e-
Mikado
Logo 600 › Logo 600 upgrade Tail pitch Slider
 Print TOPIC  Make Suggestion 

 5  Topic Subscribe

Tuesday, November 21 - 1:04 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online