RunRyder RC
 5  Topic Subscribe
WATCH
 1 page 1476 views POST REPLY
ProModeler Scorpion Power
HelicopterRadio - JR DMSS › JR 10X Transmitter Battery
02-09-2009 01:07 AM  8 years agoPost 1
Soul Flying Ace

Heliman

Davleville, AL

My Posts: All  Forum  Topic

I got a JR 10x Transmitter. Looking for a battery pack. I have the battery case but it doesn't have the circuit board to put in a new batttery pac. Anyone have a circuit board or a used complete battery pack?

PM  EMAIL  GALLERY  Attn:RR
02-09-2009 04:46 AM  8 years agoPost 2
Soul Flying Ace

Heliman

Davleville, AL

My Posts: All  Forum  Topic

I managed to figure out the wiring for the connector. I got it to power up. What's the real deal with the lipo pace for the JR 10x. Some say it will over heat the regulator. Others say it's fine. Can anyone break it down. I'm looking to hook up a lipo but before I do. I want to make sure I don't fry my radio.

PM  EMAIL  GALLERY  Attn:RR
02-09-2009 01:57 PM  8 years agoPost 3
ccpm raptor

Senior Heliman

Delaware

My Posts: All  Forum  Topic

Im using a Tunder power 2100 mah 11.1v lipo in mine but im using two IN4001 silicon diodes from radioshack in line.

PM  EMAIL  GALLERY  Attn:RR
02-09-2009 06:13 PM  8 years agoPost 4
Fred I

Senior Heliman

Irvine, CA

My Posts: All  Forum  Topic

I have a Lithium Ion pack from Duralite for sale if you're interested just for the 10X.
Please PM me.

PM  EMAIL  GALLERY  Attn:RR
02-09-2009 07:52 PM  8 years agoPost 5
HeliCSR

Senior Heliman

Hesperia, Ca, US

My Posts: All  Forum  Topic

Someone was running without the 2 diodes with no problems.

Until someone removes the back of the radio and installs the lipo,
without diodes and runs it and checks the voltage regulator heat
temp no one will know for sure if harm can be done.

It will probley be me who makes the heat test, since I have a X9303 DSM
coming tomorrow, and I beleive there is a wiring issue to be rerouted
and the case must be opened up.

Since a lot of people fly in the snow, the cold will help keep the regulator cool, thus when they fly this summer the heat may burn it up.

So because someone says they did it and have no problems, and I myself have a XP9303 SPCM radio with a lipo in it, and no problems, but I fly at 6am its cool out even in summer.

I suggest not to run the lipo in new DSM radio unless you do the diode
mod: BELOW.....

Yes, 2 diodes, the max charge voltage is 11.4. of the stock battery.
Two diodes will drop it to 11.4, IF you charge the lipo to 12.6.

That means when your radio says 9.9 volts, the lipo is about 60%
discharged, 40% remaining.

My lipo has a charge plug and a transmitter power plug
(Outrage)

Just cut the red wire to the transmitter plug, not the charge plug.

Insert two 1N4001 diode in the two leads (From Radio Shack)

With the arrow pointing away from the battery.

Plug---|<---|<----posititive of battery.

I fly and then I fly some more.
If it don't glitch then I won't crash.

PM  EMAIL  HOMEPAGE  Attn:RR
02-09-2009 08:31 PM  8 years agoPost 6
Soul Flying Ace

Heliman

Davleville, AL

My Posts: All  Forum  Topic

Thanks for the help. As soon as I get off I will make a stop by Radio Shack and give it a shot and let you know how it went.

PM  EMAIL  GALLERY  Attn:RR
02-09-2009 08:41 PM  8 years agoPost 7
Soul Flying Ace

Heliman

Davleville, AL

My Posts: All  Forum  Topic

I know I'm reading this correctly but just to make sure. the diodes are in line on the positive side. arrows pointing to the transmitter connector. Right?

I'm using a thunder power 2600mah 11.1 (3-cell pack) Pro Lite V2. What kind of times are you all getting on your transmitters with your current lipo setups?

PM  EMAIL  GALLERY  Attn:RR
02-09-2009 09:10 PM  8 years agoPost 8
HeliCSR

Senior Heliman

Hesperia, Ca, US

My Posts: All  Forum  Topic

Yes positive side.

I fly and then I fly some more.
If it don't glitch then I won't crash.

PM  EMAIL  HOMEPAGE  Attn:RR
02-10-2009 05:17 AM  8 years agoPost 9
Soul Flying Ace

Heliman

Davleville, AL

My Posts: All  Forum  Topic

You guys are great. Hooked it up and it's good to go. Thanks for all the help.

On another note. I haven't fooled around much with the 10x. I have an 8103 and I noticed that the 10x doesn't seem to have a 4 servo 90 degree swash mix. Is this something that I can do manually? and does anyone know if the new 9303 has this option or is this 4 servo 90 degree configuration obsolete?

PM  EMAIL  GALLERY  Attn:RR
02-10-2009 01:21 PM  8 years agoPost 10
9387ASH

Elite Veteran

UK

My Posts: All  Forum  Topic

PM  EMAIL  Attn:RR
02-10-2009 03:05 PM  8 years agoPost 11
HeliCSR

Senior Heliman

Hesperia, Ca, US

My Posts: All  Forum  Topic

JR x9303 DSM has 90 degree servo mixing.

I fly and then I fly some more.
If it don't glitch then I won't crash.

PM  EMAIL  HOMEPAGE  Attn:RR
02-11-2009 05:31 AM  8 years agoPost 12
Soul Flying Ace

Heliman

Davleville, AL

My Posts: All  Forum  Topic

Thanks again guys. Happy flying.

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 1476 views POST REPLY
GLOBAL 3D ProModeler
HelicopterRadio - JR DMSS › JR 10X Transmitter Battery
 Print TOPIC  Make Suggestion 

 5  Topic Subscribe

Thursday, June 29 - 6:32 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online