RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 981 views
Scorpion Power Scorpion Power
Helicopter
e-
Align
T-REX 250 › T250 with Outrage 800 flight times.
12-23-2008 06:38 PM  8 years agoPost 1
S76 Mech

rrElite Veteran

Hatboro, Pa.

My Posts: All  Forum  Topic

Thought I would post for you guys running these same packs.

Got 6 pretty consecutive 3D flights today.

stock motor/esc on 16T ,100% flat curve,CF 205D blades.

4:50 flight time

Outrage 3S 800 packs (640 = 80% rule)

#1 - 620
#2 - 636
#3 - 612
#4 - 658
#5 - 651
#6 - 631

All charged up at 2C. Average charge time on my 610C - 33 minutes.

Very nice!

Gaui Greatness X7, X5, NX4, X3

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-23-2008 07:41 PM  8 years agoPost 2
Richardmid1

rrProfessor

Leeds, England

My Posts: All  Forum  Topic

Got to get me some of them carbon blades, im only getting 3:40 mins with the same setup but with the stock blades! Im hopefully getting a Scorpion 2208 3600kv motor tomorrow but ive only just realised that the stock pinions have a 2.5mm bore and the scorpion shaft is 2.3mm!

60% of the time, it works every time!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-23-2008 07:51 PM  8 years agoPost 3
S76 Mech

rrElite Veteran

Hatboro, Pa.

My Posts: All  Forum  Topic

where can you get 2.3 pinions?

Gaui Greatness X7, X5, NX4, X3

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-23-2008 08:12 PM  8 years agoPost 4
Richardmid1

rrProfessor

Leeds, England

My Posts: All  Forum  Topic

Thats what I want to know! Are the 250 pinions Mod 0.4?

60% of the time, it works every time!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-23-2008 08:17 PM  8 years agoPost 5
Richardmid1

rrProfessor

Leeds, England

My Posts: All  Forum  Topic

If so RC Planet has 17 and 18T 2.3mm Mod 0.4 pinions but even the 17T would make the headspeed erm.. interesting with the 3600kv motor!

60% of the time, it works every time!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-23-2008 08:22 PM  8 years agoPost 6
Richardmid1

rrProfessor

Leeds, England

My Posts: All  Forum  Topic

Actually Gaui's 15T pinion is 2.3mm bore!

60% of the time, it works every time!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-24-2008 04:03 AM  8 years agoPost 7
inkspot1967

rrProfessor

Cranston Ri

My Posts: All  Forum  Topic

you know outrage now has some new OUTRAGE XP25 3S1P 11.1V 860mAH 25C/ BRICK - XTREME POWER SERIES.....

PM  EMAIL  GALLERY  Attn:RR  Quote
12-24-2008 01:24 PM  8 years agoPost 8
Gyronut

rrProfessor

Martinsville In.

My Posts: All  Forum  Topic

I'm getting a good 7:20 with Outrage 800's on a 15T.
Just mild 3D stuff.

Rick

PM  EMAIL  GALLERY  Attn:RR  Quote
12-27-2008 08:37 PM  8 years agoPost 9
Richardmid1

rrProfessor

Leeds, England

My Posts: All  Forum  Topic

7:20! You sure? I installed the Scorpion 2208 3600kv motor and the Gaui 15t pinion, the head speed is slightly higher than the stock motor with the 16T pinion and has more torque! Only draw back is im getting even less flight time now! I have my timer set at 3:30 but even then the ESC low voltage kicks in near the end of the flight!

60% of the time, it works every time!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-27-2008 08:53 PM  8 years agoPost 10
Gyronut

rrProfessor

Martinsville In.

My Posts: All  Forum  Topic

Yep.....

Thats what I have setup on my TX timer.

I started at 6 and discovered I had alot left so I increased the count.

When I charge the batts my Hyperion tells me I have put back 534 mils out of the 800.....

Not bad.........

Rick

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 981 views
Scorpion Power Scorpion Power
Helicopter
e-
Align
T-REX 250 › T250 with Outrage 800 flight times.
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Tuesday, November 21 - 8:04 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online