RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 604 views POST REPLY
Scorpion Power Scorpion Power
Helicopter
e-
Align
T-REX 600 › NEW CC SOFTWARE TROUBLES?
07-13-2008 02:30 PM  9 years agoPost 1
duke666

rrKey Veteran

Hampshire, UK

My Posts: All  Forum  Topic

Hi Guys,

I know from the discussions going on a lot of you are using the new software but I'm having problems verifying the upload. I have set gov high, fixed RPM, batt and motor info etc and when uploaded it says succesful and seems to be ok. But if I then return and read the settings it says that the motor information and head speeds need entering for fixed RPM and these fields are blank. Anybody else got this???

Duke

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
07-13-2008 03:30 PM  9 years agoPost 2
docjoe

rrElite Veteran

Stockton, CA United States

My Posts: All  Forum  Topic

You have to go to Governor mode and then click on the button "Set RPM". Then you enter the battery and motor info. You shouldn't be in governor low or high.

Joe
We haven't seen Colonel Angus around these parts for years!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
07-13-2008 04:45 PM  9 years agoPost 3
duke666

rrKey Veteran

Hampshire, UK

My Posts: All  Forum  Topic

Sorry, typo, I was in set RPM not GOV high as I stated.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
07-14-2008 05:19 PM  9 years agoPost 4
duke666

rrKey Veteran

Hampshire, UK

My Posts: All  Forum  Topic

Has no body tried reatrieving the settings from the CC ESC after using set RPM to check they are stored ok?

Duke

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
07-15-2008 03:59 AM  9 years agoPost 5
Glorysgun

rrApprentice

Enterprise, AL

My Posts: All  Forum  Topic

I got a 85HV and from set RPM I enter the motor data and pinion, update to ESC and it's done. Fooling around with this esc and new software for a full day bouncing back from 6S, 10S, and 12S on two different birds and never had a single glitch after I updated to the ESC. Seemed pretty straight forward to me and works great.

Katalepsis

PM  EMAIL  GALLERY  Attn:RR
07-15-2008 11:32 AM  9 years agoPost 6
Ben-T-Spindle

rrProfessor

Central Illinois

My Posts: All  Forum  Topic

I got a 85HV and from set RPM I enter the motor data and pinion, update to ESC and it's done. Fooling around with this esc and new software for a full day bouncing back from 6S, 10S, and 12S on two different birds and never had a single glitch after I updated to the ESC. Seemed pretty straight forward to me and works great.
That’s exactly my experience – it works great on everything I have tried. The default values are very good for most all setups. Some do require a lower gain (1 – 5 range) especially on small helicopters.

... BTS

PM  EMAIL  GALLERY  Attn:RR
07-15-2008 03:25 PM  9 years agoPost 7
duke666

rrKey Veteran

Hampshire, UK

My Posts: All  Forum  Topic

Yes agreed seems to work flawlessly, except, what do you get on your screen if you try to read the set up from the ESC with set RPM set up, is your motor and pinion data still there????

Duke

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
07-15-2008 04:56 PM  9 years agoPost 8
Ben-T-Spindle

rrProfessor

Central Illinois

My Posts: All  Forum  Topic

It looks like the PC based program computes the gear ratio, rounds it off, and stores that in the ESC. That saves a few memory locations since it only used the gear ratio. The stored headspeed values are not exactly what you input but you can’t tell the difference in flight. It does give a lot better resolution than the old High/Low governor modes.

... BTS

PM  EMAIL  GALLERY  Attn:RR
07-15-2008 10:22 PM  9 years agoPost 9
docjoe

rrElite Veteran

Stockton, CA United States

My Posts: All  Forum  Topic

I haven't had any problems retrieving my data from the ESC after programming it. You may want to uninstall the CC software from your PC and then reinstall a clean version. That may help. I have heard of problems when installing the new software on top of the old software. Just a thought.

Joe
We haven't seen Colonel Angus around these parts for years!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
WATCH
 1 page 604 views POST REPLY
Scorpion Power Scorpion Power
Helicopter
e-
Align
T-REX 600 › NEW CC SOFTWARE TROUBLES?
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Thursday, September 21 - 5:52 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online