RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 526 views
Scorpion Power Scorpion Power
07-13-2008 02:10 AM  9 years agoPost 1
reaper31

rrVeteran

Littleton, CO, usa

My Posts: All  Forum  Topic

i posted this in the scale forum as well but i would like to know what fuselages have been tried on the pantera and worked, cuz it seems to be a little taller then some other mechs.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
07-13-2008 02:21 AM  9 years agoPost 2
rsalazar

rrElite Veteran

Florida, USA

My Posts: All  Forum  Topic

You can ask jaycab. Here is a link to his Pantera

http://www.runryder.com/helicopter/t425848p1/

Send a pm to Jay, and he can tell you about what he did.

I was going to use this fuselage on the Pantera(link below), but I changed my mind about doing a 50 scale for FAI, so I did a .90 with the same fuselage

here is the link for the 50

http://www.ewtech.com/Merchant2/mer..._Code=Fuselages

PM  EMAIL  GALLERY  Attn:RR  Quote
07-13-2008 05:46 PM  9 years agoPost 3
ProModeler

rrElite Veteran

Sanford, FL (Orlando​area)

My Posts: All  Forum  Topic

I'm in the process of sticking a Pantera into one of Irwin Siner's Jet Ranger pre-painted fuselages. While, it's a tight fit, I see nothing which will preclude me completing the job. Hence, while I'm not finished, there don't appear to be any issues, which are insurmountable and thus, I have every expectation it will fit and look great. What's holding me up? Healing from my knee operation and catching up with the other tasks I have on my plate as well as taking on a remodeling task brought on by a water pipe breaking and flooding my home, which have me pretty busy.


John Beech
AMA # 47381
IRCHA #745

PM  EMAIL  Attn:RR  Quote
07-13-2008 08:50 PM  9 years agoPost 4
ExtremeAerosports

rrApprentice

Fishers, IN

My Posts: All  Forum  Topic

What's holding me up? Healing from my knee operation and catching up with the other tasks I have on my plate as well as taking on a remodeling task brought on by a water pipe breaking and flooding my home, which have me pretty busy.
Not a valid excuse.

Take your time.

Jon

Jonathan Ott
Fishers, IN
TRex 700E DFC
Chaos 600
Lynx Heli Innovations Team Pilot

PM  EMAIL  GALLERY  Attn:RR  Quote
07-14-2008 12:10 AM  9 years agoPost 5
reaper31

rrVeteran

Littleton, CO, usa

My Posts: All  Forum  Topic

well i was thinking about going with the century unpainted fuse. i was actually hoping to get a 60 size fuselage and stretch the pantera so i could use OF 670 mm blades. but i was wondering if there is gearing available to pull this off?

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 526 views
Scorpion Power Scorpion Power
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Wednesday, November 22 - 7:32 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online