I've something odd with the above set-up?
I've bound the RX and I know GY401's inside out, but when I turn on the TX and then the RX I can't get things to do the same thing every time. The gyro is set-up on the switch
Some times the RX lights are soild and the gyro is in HH.
Some times the RX lights flash and the gyro is in rate.
Some times one RX light is solid and the other flashes and the gyro is in Rate
Some times it works as it should (solid RX lights, gyro in HH)
I've found that if the gyro fires up in rate the RX lights flash, if I turn off and on again the RX the gyro will go to HH but the RX lights flash !!!!!!!
What's going on
Any help please.