RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 715 views POST REPLY
Scorpion Power Scorpion Power
Helicopter
e-
Align
T-REX 500 › TREX 500 & Futaba 9257 Servo Issue
07-10-2008 04:42 AM  9 years agoPost 1
TADitto

rrApprentice

Phoenix, AZ - USA

My Posts: All  Forum  Topic

I have a TREX 500 with futaba 9257's all around. The issue I'm having is I had a crash and stripped some of the gears. When I went to replace the gear that the servo horn attaches to I removed the bearing from the bottom of the gear and the plastic piece that is located behind the bearing that guides that gear was slightly reamed out. My question is does anyone know where I can get another one of these? They don't come with a set of servo gears. Hope you know what piece I'm talking about, I don't know what to call that piece. It's just a small plastic piece with a rectangular hole in the middle that guides the gear.

PM  EMAIL  GALLERY  Attn:RR
07-10-2008 11:15 AM  9 years agoPost 2
helicraze

rrElite Veteran

Victoria - Australia

My Posts: All  Forum  Topic

If its part of the case you can get a new case from a few online shops.

PM  EMAIL  GALLERY  Attn:RR
07-10-2008 08:20 PM  9 years agoPost 3
TADitto

rrApprentice

Phoenix, AZ - USA

My Posts: All  Forum  Topic

Its not part of the case. I'll have to take a pic so everyone can see what the part looks like.

PM  EMAIL  GALLERY  Attn:RR
07-10-2008 11:09 PM  9 years agoPost 4
helicraze

rrElite Veteran

Victoria - Australia

My Posts: All  Forum  Topic

Well if its not part of the case or gearset what else could it be??? The only thing left is the electronics

PM  EMAIL  GALLERY  Attn:RR
07-11-2008 04:09 AM  9 years agoPost 5
TADitto

rrApprentice

Phoenix, AZ - USA

My Posts: All  Forum  Topic

Here are the pics of the part I was talking about and the gear that it goes into. Once in that gear there is a metal bearing that goes over the top of it. I don't know if you can see it in the pics but this one is bad, it has been slightly deformed in the inner portion of the rectangular hole due to a crash. Hope this helps.

PM  EMAIL  GALLERY  Attn:RR
07-11-2008 04:21 AM  9 years agoPost 6
dmkc929

rrApprentice

Illinois

My Posts: All  Forum  Topic

YES

I have 3 extra pieces of those from the metal gear sets I bought for the 9650 servos. Not sure if I want to part with them though.... Looks like in order to get them you'd have to buy the whole gear set.

PM  EMAIL  GALLERY  Attn:RR
07-11-2008 04:23 AM  9 years agoPost 7
TADitto

rrApprentice

Phoenix, AZ - USA

My Posts: All  Forum  Topic

I have ordered new 9257 gear sets and they don't come with that piece. Does anyone know where I could get that piece?

PM  EMAIL  GALLERY  Attn:RR
07-11-2008 03:24 PM  9 years agoPost 8
skint eastwood

rrApprentice

uk

My Posts: All  Forum  Topic

[url=http://www.fast-lad.co.uk/store/advanced_search_result.php?keywords=gear%20set&sort=1a&page=2]

they seem to picture that piece here but is uk based

PM  EMAIL  GALLERY  Attn:RR
07-11-2008 03:27 PM  9 years agoPost 9
skint eastwood

rrApprentice

uk

My Posts: All  Forum  Topic

[url=http://www.readyheli.com/Futaba_Servo_Gear_Set_S9253_S9254_p/futm3445.htm] would this part fit?

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 715 views POST REPLY
Scorpion Power Scorpion Power
Helicopter
e-
Align
T-REX 500 › TREX 500 & Futaba 9257 Servo Issue
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Tuesday, September 26 - 7:00 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online