RunRyder RC
 9  Topic Subscribe
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 2077 views POST REPLY
Scorpion Power Scorpion Power
HelicopterMain Discussion › Uncommanded Elevator input.
07-10-2008 03:42 AM  9 years agoPost 21
turboomni

rrProfessor

East of the Equator

My Posts: All  Forum  Topic

I dont want to bore you with my plank story but,when the crash happened there was little to no load on anything. I was gliding in at low power on the motor. If anything was used it was alittle elevator input. I checked the voltage and got 5.2 V with a loaded voltmeter after the crash. Battery was a 2700 NMH. Just saying this happened with analog servos and being asked next to nothing when this happened.
Very little power drain.

Setup is everything, All my heli's can fly far better than I can pilot them

PM  EMAIL  GALLERY  Attn:RR
07-10-2008 09:38 PM  9 years agoPost 22
HeliHelge

rrNovice

Norway

My Posts: All  Forum  Topic

Hi guys.

Thanks for all answers. Yesterday i bought a new Jr8717, and today
i flew 5 tanks without problems.Only time will show if a bad servo
was the reason, that my Elevator servo was moving without any stick input. Hopefully changing the servo solved the problem. If not, changing the reciver is next on my program.

PM  EMAIL  Attn:RR
07-10-2008 09:48 PM  9 years agoPost 23
pinewaves

rrNovice

Freeport, NY - USA

My Posts: All  Forum  Topic

...though you had already changed out the AR7000?
I had a spare ar7000 that I put in and rebound it to the trans
Anyway, good luck!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
07-11-2008 12:46 AM  9 years agoPost 24
blurz28

rrApprentice

usa

My Posts: All  Forum  Topic

nope

That was me

3,2,1,...+1,2,3,4,5,6,7,8,9,10,11,12,13,14...

PM  EMAIL  GALLERY  Attn:RR
10-16-2008 09:12 PM  8 years agoPost 25
senseiwin

rrNovice

vichy france

My Posts: All  Forum  Topic

@ helihelge

Hi

So your problems are solved?

I had a crash also because of a 8717 that began to do anything ...

bye, good flights

PM  EMAIL  Attn:RR
11-18-2009 10:27 AM  7 years agoPost 26
Brendan78

rrVeteran

NSW Australia

My Posts: All  Forum  Topic

Did anyone find the cause of the problem? i'm having the same issue, it's intermittant left Aileron (can't reproduce the fault on the bench). The heli will glitch twice or so quickly but I always still have control. I've replaced my AR7100R, replaced the cyclic servos (BLS451's) and also bound another Tx(replaced the RX battery as well 7.4v lipo. Problem on happens every now and then. Did anyone find what the fault is?

PM  EMAIL  GALLERY  Attn:RR
11-18-2009 07:16 PM  7 years agoPost 27
Pistol Pete

rrProfessor

Seffner, FL

My Posts: All  Forum  Topic

Fail safe settings?

http://www.spektrumrc.com/Products/...?ProdID=SPM9540

~~Enjoying the hobby one flight at a time~~

PM  EMAIL  HOMEPAGE  GALLERY  BLOGAttn:RR
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 2077 views POST REPLY
Scorpion Power Scorpion Power
HelicopterMain Discussion › Uncommanded Elevator input.
 Print TOPIC  Make Suggestion 

 9  Topic Subscribe

Sunday, September 24 - 12:45 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online