RunRyder RC
 1  Topic Subscribe
 1 page 934 views TOPIC CLOSED
HelicopterClassifieds - Trade WantedOther Sold  Sherline milling system. Model 2000 DRO Deluxe 8-Direction Mill with digital readout.
07-09-2008 02:57 AM  9 years agoPost 1


Orange CO, CA

My Posts: All  Forum  Topic

My Classified Activity
My Classified Feedback
Add Classified Feedback

For sale is my Model 2000 DRO Deluxe 8-Direction Mill with digital readout Sherline milling system. This is a inch system not metric with digital spindle speed display and digital readout on all 3 axis and for building extremely accurate parts!!

The digital readout is a must have for this type of system. The model 2000 is so much better then the cheaper 5000 series.

Cost new over $1300 without the tooling

Also included is all the tooling in picture fly cutter, boring head, drill chuck, collets, cutters and much more.

$1250 shipped (USA 48) or best offer

Model 2000 DRO Deluxe 8-Direction Mill with digital readout!!

The 2000-series 8-direction mill was designed to take Sherline tools into the next century. Patterned after the movements of the industry standard for full-size mills, the Bridgeport® mill, the column has been redesigned to offer four additional directions of movement compared to other Sherline mills. A modified rotary column attachment allows the Z-axis column to tilt from side to side up to 90°. A laser engraved angle scale makes setting the tilt angle easy. As on the rotary column, a clamping ring design locks the column securely at the desired angle. On the back side of this special rotary column attachment is a knuckle that allows the top of the Z-axis column to be tilted either toward or away from the operator. Laser engraved scales indicate movement up to 90° in either direction on this axis.

In addition to the side-to-side rotary tilt movement, the new column base offers a center pivot lock that allows the ram to be moved both in and out as well as swung from side to side. In/out travel is 5.50" and side-to-side motion is indicated by laser engraved scales showing up to 90° of movement either way. These four movements are in addition to the standard mill’s X-, Y-, Z-axis travel and headstock rotation movement, giving a total of eight directions of motion or tilt. This much versatility puts the Sherline model 2000 mill in a class by itself in this size range. It is a fully functional shop mill that fits on a tabletop and stores on a closet shelf. When used with accessories like the tilting angle table and rotary table, the machining possibilities of the mill are limited only by part size and the extent of your imagination.

The 2000-series mill base has been extended an additional 2" over the Model 5400/5410, extending the Y-axis travel to 7.0" (178mm). This was done to accommodate the pivoting mechanisms and to take advantage of the increased arm movements. The 8-direction mill includes the same laser engraved scales on the base and table as the 5400-series deluxe mill package. Also included is a 1/4" Jacobs drill chuck and key. (The headstock spacer block is not included on the 2000-series mill, as the ram travel makes it unnecessary.)

All Sherline mills feature precision machined dovetailed slides with adjustable gibs, permanently lubricated spindle bearings, adjustable preload anti-backlash feed screws and a high-torque 90 VDC motor with electronic speed control. Speed is continuously variable from 70 to 2800 RPM without gear or belt changes. A second pulley position is also available to provide extra torque at low RPM if needed.

 1 page 934 views TOPIC CLOSED
HelicopterClassifieds - Trade WantedOther Sold  Sherline milling system. Model 2000 DRO Deluxe 8-Direction Mill with digital readout.
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Classifieds › HELP-FAQ
Attention Buyers! To receive feedback Post Reply in the seller’s topic. The seller can then click your post's Add Classified Feedback link.
Attention Sellers! Stating price is not mandatory but recommended. Post Reply commentary that interferes with the selling process (and not replied to) will be removed upon request. Click Attn:RR on the offending classified post. Repeated NIB-NIP sales are not allowed. Take it to EBay.
Buyer Beware! RunRyder cannot vouch for any seller's or buyer's credibility and will not accept responsibility for any transactions resulting from the use of this site.

Thursday, May 24 - 3:09 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online