RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 793 views
Scorpion Power Scorpion Power
HelicopterRadio - Futaba FASST › Linking the new 10c 2.4ghz with Fasst R617FS
07-08-2008 09:36 PM  9 years agoPost 1
rotorstart

rrApprentice

USA

My Posts: All  Forum  Topic

I bought this new receiver R617FS for my new Futaba 10c 2.4ghz. I hooked everything up and attempted the "easy link" button, but nothing worked. The red light on the RX remained red after the blinking.

The 14 channel RX that came with the TX worked fine.

Any idea?

Thanks in advance.

PM  EMAIL  Attn:RR  Quote
07-08-2008 09:38 PM  9 years agoPost 2
Hotwings

rrKey Veteran

Florida, West Palm​Beach.

My Posts: All  Forum  Topic

make sure your transmitter is on and putting out signal. then hold the link button until the led turns solid red and release, the led should then turn green and be linked. Ron

Please cancel my clearance, I have the field in sight. Got my RW Turbine Waiver, need lottery!

PM  EMAIL  GALLERY  Attn:RR  Quote
07-08-2008 09:51 PM  9 years agoPost 3
rotorstart

rrApprentice

USA

My Posts: All  Forum  Topic

The 10c was on with both red and blue lights on. I sat there and pressed the button for 2 minutes and it was still flashing red. I had to let go of it for it to turn solid red, but it never turned green.

What else could I do wrong?

PM  EMAIL  Attn:RR  Quote
07-08-2008 09:53 PM  9 years agoPost 4
steph280

rrElite Veteran

Irvine, California

My Posts: All  Forum  Topic

Make sure you set your TX to 7ch FASST, not FASST multi which is only for 8ch and 14ch receivers.

PM  EMAIL  GALLERY  Attn:RR  Quote
07-08-2008 09:53 PM  9 years agoPost 5
Hotwings

rrKey Veteran

Florida, West Palm​Beach.

My Posts: All  Forum  Topic

i don't know what the red and blue lights signify, on my 14mz the light is green when the radio is putting out signal, Ron

and what he said, choose the 7ch fasst instead of multi. Ron

Please cancel my clearance, I have the field in sight. Got my RW Turbine Waiver, need lottery!

PM  EMAIL  GALLERY  Attn:RR  Quote
07-08-2008 10:10 PM  9 years agoPost 6
rotorstart

rrApprentice

USA

My Posts: All  Forum  Topic

steph280 nailed it. I didn't set to the 7 channel.

Thanks to both of you steph280 and Hotwings for the help

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 793 views
Scorpion Power Scorpion Power
HelicopterRadio - Futaba FASST › Linking the new 10c 2.4ghz with Fasst R617FS
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Monday, November 20 - 11:45 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online