RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 604 views
Scorpion Power Scorpion Power
Helicopter
e-
Align
T-REX 450 › 10t Pinions for 3.2mm Shafts do they exist? Any​idea where I can source one.
07-07-2008 01:12 PM  9 years agoPost 1
wildstallionuk

rrKey Veteran

ENGLAND, FOLKESTONE,​KENT

My Posts: All  Forum  Topic

10t Pinions for 3.2mm Shafts do they exist? Any idea where I can source one.

Check out the items I have for sale in the clasifieds including a CSM 420

PM  EMAIL  GALLERY  Attn:RR  Quote
07-07-2008 01:27 PM  9 years agoPost 2
SSN Pru

rrElite Veteran

Taxachusetts

My Posts: All  Forum  Topic

hhmm, I tried to find one for my 4200 kv Medusa motor once. I had to really gear it down to work on my Trex450. I don't remember if I was able to find one.

Maybe Ikarus makes one? Ikarus comes to mind...

The problem with the 3.2mm shaft and a 10t is that the bore gets awefully close to the root diameter of the gear teeth. There just isn't much meat left...

PM  EMAIL  GALLERY  Attn:RR  Quote
07-07-2008 02:45 PM  9 years agoPost 3
Heli 770

rrProfessor

USA.

My Posts: All  Forum  Topic

Any vendor that stocks Shogun 400 part should have it. That's the stock pinion for it.

PM  EMAIL  Attn:RR  Quote
07-07-2008 02:56 PM  9 years agoPost 4
Heli 770

rrProfessor

USA.

My Posts: All  Forum  Topic

ReadyHeli, has them in stock.

PM  EMAIL  Attn:RR  Quote
07-07-2008 03:26 PM  9 years agoPost 5
TomRex

rrElite Veteran

West Palm Beach ​Join Date:​12-28-2005

My Posts: All  Forum  Topic

I have a NIP 3.2-10t from hobby-lobby/icarus if needed

nip is the same as new in package

Ignorance is the absence of facts.Stupid is lacking the intellectual capacity to comprehend the fact

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
07-07-2008 03:31 PM  9 years agoPost 6
ckoelliker

rrElite Veteran

St. Simons, GA

My Posts: All  Forum  Topic

ReadyHeli, has them in stock.
Can you post the link. I could not find a 3.2 on their site.

PM  EMAIL  GALLERY  Attn:RR  Quote
07-07-2008 03:37 PM  9 years agoPost 7
Heli 770

rrProfessor

USA.

My Posts: All  Forum  Topic

ckoeliker
readyheli.com/RevCo_Pinions_s/109.htm

PM  EMAIL  Attn:RR  Quote
07-07-2008 03:53 PM  9 years agoPost 8
SnackEater

rrNovice

Hong Kong

My Posts: All  Forum  Topic

Gazaur has it.
http://www.gazaur.com/twe/index.php...38f49aa4ece288d
Stock Mars480 comes with 10t pinion for 3.2mm shaft.

PM  EMAIL  Attn:RR  Quote
07-07-2008 04:12 PM  9 years agoPost 9
ckoelliker

rrElite Veteran

St. Simons, GA

My Posts: All  Forum  Topic

The only ten tooth for the 450 that I see, is not a 3.20mm shaft diameter.

PM  EMAIL  GALLERY  Attn:RR  Quote
07-07-2008 04:24 PM  9 years agoPost 10
Heli 770

rrProfessor

USA.

My Posts: All  Forum  Topic

ckoelikiker
Sorry! I got the numbers mixed.

PM  EMAIL  Attn:RR  Quote
07-07-2008 04:30 PM  9 years agoPost 11
TomRex

rrElite Veteran

West Palm Beach ​Join Date:​12-28-2005

My Posts: All  Forum  Topic

John has the 2.3 but not the 3.2 10t I origionally got mine thru him back when but he has Revco products now and the guy says there's not enough material for his machine to make them.
Again, I have a new in package Icarus 3.2 10t mod 5 pinion if you need it!

Ignorance is the absence of facts.Stupid is lacking the intellectual capacity to comprehend the fact

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
07-08-2008 06:00 AM  9 years agoPost 12
rcdaddy

rrVeteran

Singapore

My Posts: All  Forum  Topic

PM  EMAIL  GALLERY  Attn:RR  Quote
07-08-2008 06:22 AM  9 years agoPost 13
docjoe

rrElite Veteran

Stockton, CA United​States

My Posts: All  Forum  Topic

Go to ikarus.net and you can find one. I also think I have a new one in the package.

Joe
We haven't seen Colonel Angus around these parts for years!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
07-08-2008 08:08 AM  9 years agoPost 14
REXCHANG

rrNovice

Henderson, NV

My Posts: All  Forum  Topic

Gazaur motor gear is 3.17mm might fit. One pack with two motor gears(10/11T)
http://www.stasvc.com/480commonsparectrl.html
or cheaper from Hobby lobby, they are on sale Gazaur parts
http://www.hobby-lobby.com/gazaur-parts.htm

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 604 views
Scorpion Power Scorpion Power
Helicopter
e-
Align
T-REX 450 › 10t Pinions for 3.2mm Shafts do they exist? Any​idea where I can source one.
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Tuesday, November 21 - 4:43 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online