RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 536 views
Scorpion Power Scorpion Power
Helicopter
e-
Blade
Blade 400 › 3D Dx7 and B400
05-18-2008 04:25 AM  9 years agoPost 1
Vendetta

rrVeteran

Miami, Florida 33173

My Posts: All  Forum  Topic

Can anyone give me values to set-up the b400 with a DX7? Expo's, recommended curves, etc ? Thanks

-- Gentlemen, we can rebuild it... We have the technology....Better…stronger…faster...--

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-18-2008 04:35 AM  9 years agoPost 2
StevenT

rrVeteran

Dallas, GA USA

My Posts: All  Forum  Topic

[TYPE SELECT] HELI[THRO RECOVERY] INH[INPUT SELECT] AUX2 = F.MOD GEAR = GYRO[SWASH TYPE] 3 SERVOS 120°[D/R & EXP] --> all Flight Mode positions the same POS-0 = POS-1 AILE EXP LIN D/R 100% ELEV EXP LIN D/R 100% RUDD EXP LIN D/R 100%[AUTO D/R EXP] NORM INH ST-1 P-0 ST-2 P-1 HOLD INH[REVERSING SW] ch1 THRO=NORM ch2 AILE=NORM ch3 ELEV=NORM ch4 RUDD=REV. --> Note: G90 Gyro sw is REV ch5 GEAR=NORM ch6 PIT.=REV. ch7 AUX2=NORM[SUB TRIM] I set the sub trim to make the servo arms on the AILE, ELEV and PIT. exactly 90° at mid throttle. (Remember to have the swash plate level and 1/2" from the end of the main shaft at mid throttle.)[TRAVEL ADJUST] All remain at 100%[SWASH MIX] - 3 SERVOS 120° AILE -100% ELEV -100% PIT. - 30% Gives me +/- 12° in Idle Up Mode EXP INH[THROTTLE HOLD] HOLD POS. 0.0% SW:RUDD D/R I put the RUDD D/R sw to "on" (1) when I plug in the battery on the helicopter (and when a crash is imminent..)[THROTTLE CURVE] NORM ST-1 ST-2 EXP OFF OFF OFF POINT-L 0.0% 100.0% 100.0% POINT-1 INH INH INH POINT-2 50.0% 50.0% 75.0% POINT-3 INH INH INH POINT-H 100.0% 100.0% 100.0%[PITCH CURVE] - this gives a smooth transition from NORM to ST-1 NORM ST-1 ST-2 HOLD EXP OFF OFF OFF OFF POINT-L 40.0% 0.0% 0.0% 40.0% POINT-1 INH INH INH INH POINT-2 50.0% 50.0% 50.0% 50.0% POINT-3 INH INH INH INH POINT-H 100.0% 100.0% 100.0% 100.0% - pitch curve in NORM is -2°/+12°[REVO MIX] NORM STNT UP 0% UP 0% DN 0% DN 0%[GYRO SENS] AUTO F.MODE NORM:0 RATE: STNT:1 0: 86% HOLD:0 1: 86%[PROG.MIX1] INH[PROG.MIX2] - allows tail to arm with RUDD D/R sw "on" (1) RUDD-> RUDD RATE: +100% 0% SW:HOLD OFFSET:-100[PROG.MIX3] INH[TIMER] DOWN-T 8:30 - with stock E-Flite Lipo battery

I found this during a search. Hope it helps.

Steven

Shhh, don't tell the wife.

PM  EMAIL  GALLERY  Attn:RR  Quote
05-18-2008 04:36 AM  9 years agoPost 3
Vendetta

rrVeteran

Miami, Florida 33173

My Posts: All  Forum  Topic

Your the man !! Thanks!

-- Gentlemen, we can rebuild it... We have the technology....Better…stronger…faster...--

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 536 views
Scorpion Power Scorpion Power
Helicopter
e-
Blade
Blade 400 › 3D Dx7 and B400
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Thursday, November 23 - 12:56 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online