RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 631 views POST REPLY
Scorpion Power Scorpion Power
HelicopterThunder TigerRAPTOR 50 › mounting carbsmart servo
05-18-2008 03:29 AM  9 years agoPost 1
legoman67

rrElite Veteran

Nanoose Bay B.C, Canada

My Posts: All  Forum  Topic

well, im considering a carbsmart, and would like to see how others mounted there servo's.. any pics or advise would be great!

PM  EMAIL  GALLERY  Attn:RR
05-18-2008 04:03 AM  9 years agoPost 2
ESWLFSE

rrElite Veteran

Liberty Hill, TX

My Posts: All  Forum  Topic

I cut a rectangular opening in the curved plastic area above the clutch but I'm probably the only one that cut their frames to mount it.

PM  EMAIL  GALLERY  Attn:RR
05-18-2008 01:20 PM  9 years agoPost 3
JimmyD

rrNovice

Largo, FL

My Posts: All  Forum  Topic

I used an old Trex 450 frame. but there are a lots of good ideas out there....
Check out this thread....
http://www.runryder.com/helicopter/t423244p1/

Jimmy D

PM  EMAIL  HOMEPAGE  Attn:RR
05-18-2008 01:41 PM  9 years agoPost 4
jsenicka

rrProfessor

Eagle River, WI

My Posts: All  Forum  Topic

http://www.runryder.com/helicopter/t412562p1

Jim Senicka
Team Manager, GrandRC Flight Team

PM  EMAIL  GALLERY  Attn:RR
05-18-2008 02:03 PM  9 years agoPost 5
flying buffalo

rrApprentice

Darwin, NT, Australia

My Posts: All  Forum  Topic

On my 50 titan I mounted mine in the gap at the bottom of the servo mounting tray and zipped tied it in(could have possible vibration issues later) On my 90se I used the supplied fan shroud reducer, I didnt need it as the os91sz needed all the head room anyway.

Yesterday was history...tomorrow is mystery

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 631 views POST REPLY
Scorpion Power Scorpion Power
HelicopterThunder TigerRAPTOR 50 › mounting carbsmart servo
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Thursday, September 21 - 3:16 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online