RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 492 views TOPIC CLOSED
Scorpion Power Scorpion Power
HelicopterThunder TigerRAPTOR 50 › Mavrikk head BINDING at full coll.
05-16-2008 01:12 AM  9 years agoPost 1
phillips942

rrApprentice

San Diego, CA

My Posts: All  Forum  Topic

Can someone please tell me if this is normal....

Gotta Mavrikk head with plastic blade grips.... Flown it for a few weeks now but I caught something i didn't see before. At full collective i do not have full roll cyclic or aft cyclic without my washout arms hitting my loop linkages. What's the deal? Do i have something hooked up wrong... I will post a picture later but I need some answers...Im thinkin about getting a new head just to eliminate this issue.

Second!!! Can a get a full head with a underslung flybar for my 50 Titan??

PM  EMAIL  GALLERY  Attn:RR
05-16-2008 01:21 AM  9 years agoPost 2
Divot

rrVeteran

Mesa, AZ

My Posts: All  Forum  Topic

Remember change happens 90 degrees after the input.
what is binding on the ground may not be binding in the air.
to check forward/backward elevator place the blade out
to the sides of the heli. Then give elevator input.
If it binds you have a problem. Just reverse to check aerilon

PM  EMAIL  Attn:RR
05-16-2008 04:15 AM  9 years agoPost 3
phillips942

rrApprentice

San Diego, CA

My Posts: All  Forum  Topic

I don't much understand what you mean but im not doubting you. What i know from experience is...when you do your initial head check you look for binding in all throws. I remember getting that when i first programmed my head. Now i found this and its not right... I will get you pics and show you in detail..

PM  EMAIL  GALLERY  Attn:RR
05-17-2008 01:38 PM  9 years agoPost 4
Mike Bilyk

rrApprentice

Tulsa, OK - USA

My Posts: All  Forum  Topic

mine seems to do the same thing but i havent had any issues in flight with it so im going to keep it.

i should have spent a little extra and got the kasama head.

AMA # 617778
Team MasterCard

PM  EMAIL  GALLERY  Attn:RR
05-17-2008 04:29 PM  9 years agoPost 5
Steve Cochrane

rrApprentice

Mount Dora,Florida

My Posts: All  Forum  Topic

I have a mavrikk head and I do not have this problem,you may have your linkages adjusted wrong or to much travil ajustment in your radio.

PM  EMAIL  Attn:RR
05-17-2008 04:46 PM  9 years agoPost 6
Mike Bilyk

rrApprentice

Tulsa, OK - USA

My Posts: All  Forum  Topic

I have a mavrikk head and I do not have this problem,you may have your linkages adjusted wrong or to much travil ajustment in your radio.
im using stock tt specs. on the linkages and i have 10+/10- pitch and 8+/8- on cyclic.

when im at full positive pitch and full cyclic at the same time it binds slightly.

AMA # 617778
Team MasterCard

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 492 views TOPIC CLOSED
Scorpion Power Scorpion Power
HelicopterThunder TigerRAPTOR 50 › Mavrikk head BINDING at full coll.
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Sunday, September 24 - 5:50 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online