RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 1918 views POST REPLY
Scorpion Power Scorpion Power
05-15-2008 03:16 PM  9 years agoPost 1
DMB9876

rrNovice

HASTINGS,MN

My Posts: All  Forum  Topic

HEY WHATS UP,,IM NEW TO THE FORUM,,JUST BOUGHT A NEW STINGER 30 YESTERDAY,A BUDDY OF MINE OWNS A HOBBY STORE SO HE GAVE ME A GOOD DEAL ON IT, AND I HAPPENED TO HAVE A OS 32 LAYIN AROUND...DOES ANYONE KNOW IF THATS GONNA BE ENOUGH POWER? ANY TIPS WOULD HELP ALOT THIS IS MY FIRST NITRO, UNTILL NOW IVE BEEN ON A TREX! THANX DAVE

PM  EMAIL  Attn:RR
05-15-2008 06:17 PM  9 years agoPost 2
FLYINFOOL

rrKey Veteran

Cudahy, WI

My Posts: All  Forum  Topic

Hey Dave, Welcome aboard.

First, Please turn off the CAPS LOCK.
Caps are considered "yelling" at someone on the forums.

Is your OS32 the heli version or the airplane version?
If it is the heli version it will work great in your Stinger 30.
That is the engine it was originally designed for.
If it is the Airplane version you will have to be very careful to not overheat it. The heli version has a bigger heatsink head for cooling.

The OS32 will be a little short on power for really hard core 3D but will be just fine for light 3D and general aerobatics.
But on the plus side, by running the small engine you will learn to use proper collective management right from the beginning.


Jeff Borowski
RAMS Club President
www.ramsrcclub.com

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
05-22-2008 03:50 PM  9 years agoPost 3
DMB9876

rrNovice

HASTINGS,MN

My Posts: All  Forum  Topic

clutch

One more question....can i use the raptor clutch and shaft for my gohbee???

PM  EMAIL  Attn:RR
05-22-2008 08:15 PM  9 years agoPost 4
FLYINFOOL

rrKey Veteran

Cudahy, WI

My Posts: All  Forum  Topic

The Raptor V2 and Gohbee clutch and start shaft are interchangeable.


Jeff Borowski
RAMS Club President
www.ramsrcclub.com

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
05-27-2008 12:05 PM  9 years agoPost 5
Eleven_Bravo

rrVeteran

Salisbury,NC

My Posts: All  Forum  Topic

Are the mainshafts interchangeable also ??? between Gohbee and Raptor 50

ENGAGE!!

PM  EMAIL  GALLERY  Attn:RR
05-27-2008 04:59 PM  9 years agoPost 6
Gohbee

rrApprentice

SC

My Posts: All  Forum  Topic

Not anymore. Early on we changed our main shaft to have a 4mm cross hole on top instead of a 3mm cross hole. Thus, our head block bolts on with a 4mm bolt as oppossed to a 3mm bolt on the Raptor. Other than that they are the same. I suppose you could drill out your Raptor head block and use Gohbee mainshafts. We've found the 4mm cross bolt to be more reliable than the 3mm bolts.

-David

PM  EMAIL  HOMEPAGE  Attn:RR
WATCH
 1 page 1918 views POST REPLY
Scorpion Power Scorpion Power
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Thursday, September 21 - 6:50 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online