RunRyder RC
 2  Topic Subscribe
WATCH
 2 pages [ <<    <    ( 1 )     2     NEXT    >> ] 3170 views
Scorpion Power Scorpion Power
Helicopter
e-
Blade
Blade 400 › 3D hitec servo for tail *edit* put hs 81mg ,​hs65mg on cyclic maybe just a lil more advice
05-15-2008 12:44 PM  9 years agoPost 1
keiser BLADE

rrApprentice

WV USA

My Posts: All  Forum  Topic

anyone know a good hitec servo for the 110 gyro, thats all my lhs has in stock, thanks brandon

Brandon

PM  EMAIL  GALLERY  Attn:RR  Quote
05-15-2008 04:48 PM  9 years agoPost 2
keiser BLADE

rrApprentice

WV USA

My Posts: All  Forum  Topic

ive been searching would the hs 81 for tail, hs 65 cyclic work pretty good thanks brandon

Brandon

PM  EMAIL  GALLERY  Attn:RR  Quote
05-15-2008 08:12 PM  9 years agoPost 3
speeddemon370

rrVeteran

Spruce Grove,​Alberta, Canada

My Posts: All  Forum  Topic

I don't have any experience with hitec servo's so I can't answer your question, I thought I might shed some light on why nobody's answering your thread. This topic has been discussed to death and you're probably going to have to look in an EXISTING thread rather than starting a new one. You are warned about duplicate threads on the rr "rules" page. Oh, and reccomended servo imo is the dsp75.

with 2 ears and 1 mouth you should listen twice as much as you talk

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
05-15-2008 08:25 PM  9 years agoPost 4
StevenT

rrVeteran

Dallas, GA USA

My Posts: All  Forum  Topic

I have the 81mg and the 65mg's on my B400. My heli flies 200% better. I haven't crashed yet with the 65's on, but I've pounded the ground with the 81 and it survived every time. Still, if I had the money, I would put a 401 and digital tail servo on her. I've had the tail blow out many times in fast backward flight. Go with the 81 if your just wanting to replace the servo and keep it cheap. If you've got the money, buy the better equipment. If you go with the 81, be prepared to reverse your gyro; I was grounded for 2 days trying to figure that one out.

Steven

Shhh, don't tell the wife.

PM  EMAIL  GALLERY  Attn:RR  Quote
05-15-2008 09:16 PM  9 years agoPost 5
gooberseptember

rrApprentice

monroeville pa

My Posts: All  Forum  Topic

i just did the 65mg on the tail and it is rock solid.

Michael

PM  EMAIL  GALLERY  Attn:RR  Quote
05-16-2008 12:40 AM  9 years agoPost 6
tonyn

rrApprentice

orlando florida

My Posts: All  Forum  Topic

Guess i got some over kill im running a 401/9257 on my blade 400

Flying

PM  EMAIL  GALLERY  Attn:RR  Quote
05-16-2008 12:47 AM  9 years agoPost 7
gooberseptember

rrApprentice

monroeville pa

My Posts: All  Forum  Topic

overkill is a good thing, isnt it? LOL

PM  EMAIL  GALLERY  Attn:RR  Quote
05-16-2008 01:24 AM  9 years agoPost 8
keiser BLADE

rrApprentice

WV USA

My Posts: All  Forum  Topic

ok thanks everyone, i just dont want to fly with all the e flite servo problems, is their any kind of search on rr, thanks again Brandon

Brandon

PM  EMAIL  GALLERY  Attn:RR  Quote
05-16-2008 01:57 AM  9 years agoPost 9
gooberseptember

rrApprentice

monroeville pa

My Posts: All  Forum  Topic

PM  EMAIL  GALLERY  Attn:RR  Quote
05-16-2008 02:07 AM  9 years agoPost 10
keiser BLADE

rrApprentice

WV USA

My Posts: All  Forum  Topic

wow i just slap overlooked it, i feel stupid thanks Brandon lol

Brandon

PM  EMAIL  GALLERY  Attn:RR  Quote
05-16-2008 05:04 AM  9 years agoPost 11
soljkaer20

rrNovice

Waynesville, ohio

My Posts: All  Forum  Topic

hitec 5083mg nice servo very similiar to the futaba 9257

PM  EMAIL  Attn:RR  Quote
05-16-2008 12:49 PM  9 years agoPost 12
keiser BLADE

rrApprentice

WV USA

My Posts: All  Forum  Topic

thanks soljkaer20
Brandon

Brandon

PM  EMAIL  GALLERY  Attn:RR  Quote
05-16-2008 02:44 PM  9 years agoPost 13
30636086

rrKey Veteran

Tacoma, WA

My Posts: All  Forum  Topic

[quote]be prepared to reverse your gyro; I was grounded for 2 days trying to figure that one out.
[quote]


I was in the same boat after an encounter with hard surface replaced ALL servos and then the headache began trying to figure it out and been new I took a lot of Advil's, research, questions and the help of a guys here was what really helped!! THANKS!!

I dont suffer from mental iIlness, I actually enjoy mine!

PM  EMAIL  GALLERY  Attn:RR  Quote
05-16-2008 03:02 PM  9 years agoPost 14
keiser BLADE

rrApprentice

WV USA

My Posts: All  Forum  Topic

ok ill post back when i get it, should i just set it negative of what it is now its like 66.7 or somewhere in that neighborhood, im gonna check my lhs today and see if they have the HS 5083 thanks brandon
p.s. this site it awesome thanks again

Brandon

PM  EMAIL  GALLERY  Attn:RR  Quote
05-16-2008 08:39 PM  9 years agoPost 15
StevenT

rrVeteran

Dallas, GA USA

My Posts: All  Forum  Topic

For 65's on cyclic:

TX Reverse Menu: Thro-N, Elev-R, Gyro-N, Aile-R, Rudd-N, Pitc-N

Swash Mix Menu: Aile +
Elev -
Pitch +

These are my settings and my heli flys great. Of couse the above are for the DX6i. Hope they help.

Steven

Shhh, don't tell the wife.

PM  EMAIL  GALLERY  Attn:RR  Quote
05-16-2008 10:01 PM  9 years agoPost 16
keiser BLADE

rrApprentice

WV USA

My Posts: All  Forum  Topic

ok StevenT thanks that will help alot
Brandon

Brandon

PM  EMAIL  GALLERY  Attn:RR  Quote
05-19-2008 05:22 AM  9 years agoPost 17
keiser BLADE

rrApprentice

WV USA

My Posts: All  Forum  Topic

ok i put the 81 mg on there, it started to piro uncontrolably, so i flipped the switch on the gyro to rev and reversed the gyro on the tx, then re binded and i can control it now but it still spins to the left, snd i have about 18 clicks trim and still hold it right on the stick it will stay straight, so should i move the servo horn and adjust some subtrim, maybe bump up the gyro, i dont know much about the tx so i may need a lil help

Brandon

PM  EMAIL  GALLERY  Attn:RR  Quote
05-19-2008 05:30 AM  9 years agoPost 18
keiser BLADE

rrApprentice

WV USA

My Posts: All  Forum  Topic

also a few other questions, i was looking at a tp 610c balance charger, should i get it or get the superbrain 989, i need a good charger the eflight one kinda worries me. my lhs has the hs 65 in karbonite gears, should i just get the metal gears or will the carbonite suffice, thanks brandon

Brandon

PM  EMAIL  GALLERY  Attn:RR  Quote
05-19-2008 11:26 AM  9 years agoPost 19
gooberseptember

rrApprentice

monroeville pa

My Posts: All  Forum  Topic

the tp 610 is great. I have the 1010c. The mrc is not a true lipo charger. My lipos come with a warning that tells me that if i use the mrc to charge them they will not be covered under warranty.

Michael

PM  EMAIL  GALLERY  Attn:RR  Quote
05-19-2008 12:41 PM  9 years agoPost 20
keiser BLADE

rrApprentice

WV USA

My Posts: All  Forum  Topic

thanks gooberseptember, ill probably just get the 610

Brandon

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 2 pages [ <<    <    ( 1 )     2     NEXT    >> ] 3170 views
Scorpion Power Scorpion Power
Helicopter
e-
Blade
Blade 400 › 3D hitec servo for tail *edit* put hs 81mg ,​hs65mg on cyclic maybe just a lil more advice
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Saturday, November 18 - 4:21 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online