RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 373 views
HelicopterAerial Photography and Video › R2000 JR receiver to the Spartan A2000i Wire Settings
05-14-2008 12:59 AM  9 years agoPost 1
scott sr

rrVeteran

SEAFORD

My Posts: All  Forum  Topic

Can anyone just tell me which wire from the receiver goes to which position on the Spartan A2000i I know this is kinda shown in the Spartan instruction book but if I remember right they are not exactly right . I really appreciate any help. Thank You Scott Sr.

Scott Sr. ><> ****Support Our Troops**** ><>

PM  EMAIL  GALLERY  Attn:RR  Quote
05-14-2008 01:31 AM  9 years agoPost 2
keithm

rrApprentice

Ocala, FL

My Posts: All  Forum  Topic

Scott:

It is not possible to answer your question without knowing what swashplate type your helicopter uses. You will have to determine the swashplate type by looking at pages 8 & 9 in the User Guide to which Noobs provided a link in your previous post.

Once you determine this, you can hook the proper receiver channel from the R2000 to the proper servo plug on the AP2000i. If you post the type of heli you are using, someone on this forum may be familiar with the interface and can give you exact guidance for how to make the interface.

PM  EMAIL  GALLERY  Attn:RR  Quote
05-14-2008 01:37 AM  9 years agoPost 3
Autoeject

rrKey Veteran

Ashtabula, OH, USA

My Posts: All  Forum  Topic

Slot #5=Ail, Slot#6=Ele, Slot #7=Pitch. I don't know which slot #s those would be from your RX. Remember to set tx to SR-1(single servo mechanical) swash type.

Mark Webber
wai-rc.com
Spartan RC Distributor
Outrage Helicopters

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 373 views
HelicopterAerial Photography and Video › R2000 JR receiver to the Spartan A2000i Wire Settings
05-14-2008 01:51 AM  9 years ago •• Post 4 ••
Autoeject

rrKey Veteran

Ashtabula, OH, USA

My Posts: All  Forum  Topic

OK, looked up a pic of the rx. Looks like slot2 rx to slot5 AP2000i, Slot3 rx to slot6, and Aux1,slot6(I believe) to slot 7.

I think JR uses Aux1 for pitch. If not sure, you can connect a servo to it and move collective to confirm.

I need to know which heli to suggest which servos in which slots.

Mark Webber
wai-rc.com
Spartan RC Distributor
Outrage Helicopters

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-14-2008 02:27 AM  9 years agoPost 5
scott sr

rrVeteran

SEAFORD

My Posts: All  Forum  Topic

Sorry for not giving enough information . I have Mikado Logo 10 With the SR-3 swash-plate as in the Spartan booklet . It has the Jr R2000 10 channel receiver . It uses 3 servos on the swash-plate and one for the rudder . I hope this is enough.

Scott Sr. ><> ****Support Our Troops**** ><>

PM  EMAIL  GALLERY  Attn:RR  Quote
05-14-2008 02:35 AM  9 years agoPost 6
Autoeject

rrKey Veteran

Ashtabula, OH, USA

My Posts: All  Forum  Topic

Servo#1 will go in slot #1 on your AP2000i. This is the servo that links to the swashplate inline with the tailboom. The two offset servos will go in slot #'s 2 and 3. It doesn't matter which. The rudder goes in the rudder slot on the rx.

Mark Webber
wai-rc.com
Spartan RC Distributor
Outrage Helicopters

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 373 views
HelicopterAerial Photography and Video › R2000 JR receiver to the Spartan A2000i Wire Settings
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Tuesday, December 12 - 11:55 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online