RunRyder RC
 0  Topic Subscribe
WATCH
 1 page 752 views POST REPLY
Scorpion Power Scorpion Power
HelicopterAlignT-REX 600N › GV1 ~ Align gov
05-12-2008 07:27 PM  9 years agoPost 1
rkeith2

rrVeteran

Norco, CA

My Posts: All  Forum  Topic

I had issues with the ALign gov dropping out and went to standard curves for the weekend.

I wanted to stick a GV1 in but can only get 34% in the sensor.

Anyone else had problems


PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
05-12-2008 07:48 PM  9 years agoPost 2
revomix

rrApprentice

Fontana, CA

My Posts: All  Forum  Topic

hey ron sounds like your sensor is to far from the magnet. or maybe the magnet is upside down. how old is the sensor I've had those just go bad for no reason.

PM  EMAIL  GALLERY  Attn:RR
05-12-2008 07:49 PM  9 years agoPost 3
baddynergy

rrElite Veteran

sierra madre, ca- usa

My Posts: All  Forum  Topic

move the sensor closer to the magnet.

**Unattended children will be givin a shot of espresso and a puppy**

PM  EMAIL  GALLERY  Attn:RR
05-12-2008 10:09 PM  9 years agoPost 4
rkeith2

rrVeteran

Norco, CA

My Posts: All  Forum  Topic

Sensor position has been played with yes and it worked fine on my Knight 50


PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
05-14-2008 02:59 AM  9 years agoPost 5
Kevin Dalrymple

rrKey Veteran

Indianapolis

My Posts: All  Forum  Topic

Dose the sensor reading stay at 34%. If it dose you have a bad sensor. Try a new magnet or check the sensor on your knight 50. If the magnets are cracked on you 600N that may be the reason your Align Giv did not work. 34% is low. My sensor is 2mm away from the magnet and i get 97% with my GV-1.

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 752 views POST REPLY
Scorpion Power Scorpion Power
HelicopterAlignT-REX 600N › GV1 ~ Align gov
 Print TOPIC  Make Suggestion 

 0  Topic Subscribe

Monday, September 25 - 9:29 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online