Thought I would review my 611 setup... something I noticed.. and wondered if it was wrong..
When in the LmtA or LmtB menu I have the settings at 125% which allow me full tail movement without binding. My radio (RD6000) is set at 100% EndPoint for left and right stick. While in this menu I move my stick left or right and the servo stops about 10 degrees before the rudder stick is at full deflection. If I set my EndPoints down to about 70 I get full deflection with servo movement.
Question is... should I set the radio endpoints at 100.. or 70? since I fly in AVC mode.. does this realy matter... I thought I read somewhere on here that the EndPoint settings controlled the piro rate.