My Posts: All Forum Topic
I've been putting this build aside for a year and a half now and finally got to building it last weekend. After running into a few problems with my re-tracs i finally got it working. Some of the link from the servo to the swinging arm are just not tough enough to hold its position..I have to use a TT link for the arm. Before the final stage, i did a flight test and notice that the mechanics is not firm in place. As it lift off the frame seems like it wants to get out of the fuse. The mechanics is a little flimpsy inside the fuse and wondering what to put in place to get it stiffer...I have double up on my frame stiffner one inside and one outside the fuse along with a couple of piece of wood to clear the engine from the body.. I flew it like that for a couple of minutes and brought down. Still i can move the mechanics inside the fuse...I am in final stage of building it now. Windows in place, oneway fueling vlv, remote glow installed also..Only thing i know missing is the lights. I have 6 set of lights complement of Gem 2000 3 red and 3 green..1 red blinking and 1 green blinking. Where to install them?..Also is it possible to have the lights separated from my reciever? Was thinking with on off switch direct connection to a separate RX batt..Suggestions?..