RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 496 views POST REPLY
Scorpion Power Scorpion Power
HelicopterMain Discussion › Help Needed With Telebee And Airtronics
03-17-2003 01:14 AM  14 years agoPost 1
thriller

rrNovice

british columbia canada

My Posts: All  Forum  Topic

am trying to set up a raptor with a new telebee 703 and an older airtronics quasar radio. The instructions say to" watch the servo with the with the pushrod off to see if it is in heading hold or rate mode. If it is in heading hold to toggle the gear switch to put it into rate mode." here is the problem the quasar radio does not have a "toggle switch for gear. right now chan 5 if you go to airplane mode is for the gear, yet there is no switch for it .

We tried to fly the heli without going to rate mode(as we don't know how to get it there) and the tail whips back and forth very quick as soon as you touch the rudder?????
Any help would be great. thanks in advance

PM  EMAIL  Attn:RR
03-17-2003 03:02 AM  14 years agoPost 2
mej

rrApprentice

Frostbite Falls, Mn

My Posts: All  Forum  Topic

If I remember correctly, the only way to control the gear channel is by switching to and from hover to idleup modes since you can't refefine the switch. so you will have to set the idle up mode to behave as if its 'normal', but the downfall to this is the trims are usually inactivated and you have to use the internal subtrims instead.

If you can get that to work, then hopefully you can adjust the ATV's on channel 5. Some low end radios won't do that, and then the choices are to either set the servo travel so that 100% gain won't overdo it, or go to a manual gyro like the 240, or 502 where you can set the gain from the gyro control box.

You may also be able to re-program the telebee so that maximum gain is something less than 100%

PM  EMAIL  Attn:RR
WATCH
 1 page 496 views POST REPLY
Scorpion Power Scorpion Power
HelicopterMain Discussion › Help Needed With Telebee And Airtronics
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Friday, September 22 - 5:24 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online