RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 613 views POST REPLY
Scorpion Power Scorpion Power
HelicopterBeginners Corner › Set up on servo'c
03-14-2003 07:54 AM  14 years agoPost 1
New Flyer

rrApprentice

Dublin, Ireland

My Posts: All  Forum  Topic

Set up on servo's

First I'd like to say thanks all you guys for the help over the last month or so.
I am now connecting all the servo's and just need to ask a few questions about the sevro links. I have so far connected:
Trottle servo to the engine (Left stick up and down)
Elevator sevro (Right stick up and down)
Aileron servo (Right Stick left and right)
Rudder servo (Left stick left and right).

And here is what I am confussed at.
I have a CSM400 Gyro with 3 outputs, Rudder In, Servo and Gain. Where do these connect to?
And the Collective Pitch linkage. What moves this sevro on my radio and were do I connect it to?

Thanks
Niall

PM  EMAIL  GALLERY  Attn:RR
03-14-2003 08:08 AM  14 years agoPost 2
mrNoodles

rrProfessor

Borlänge, Sweden

My Posts: All  Forum  Topic

I see that you has 3810 tx. Which reciever did yiu get with it?

Im using a NER-649S S-PCM. On page 23 in the manual it says that the pitch servo should be plugged in to Aux1/Pitch.

As for the gyro Im quite sure that Rudder in is connected to Rudder, Servo connects the tail servo, and Gain to Aux2

Check your gyro manual for more details

Good Luck

/Fredrik
'Hm now I just have to find out where to connect the GV1 sensor to the Jazz80 ESC.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
03-14-2003 08:13 AM  14 years agoPost 3
FinnDave

rrElite Veteran

Kouvola, Finland

My Posts: All  Forum  Topic

The CSM 400 comes with a decent manual, which clearly explains which channels to plug the leads into. If you don't have the manual, it is available for download from CSM http://www.rcmodels.org/csm/400full.doc

If it still doesn't makes sense, please ask again, I have a CSM 400 but use Futaba radio and it is possible that the channel numbers are different, I don't want to confuse you with incorrect information. CSM are very helpful, I have found.

David S., Kouvola, Finland

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
WATCH
 1 page 613 views POST REPLY
Scorpion Power Scorpion Power
HelicopterBeginners Corner › Set up on servo'c
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Saturday, September 23 - 3:26 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online