RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 735 views
Scorpion Power Scorpion Power
HelicopterJR Heli Vibe 90/50, Sylphide 90, GSR260 › Vigor cs Fan Shroud problem
03-14-2003 06:38 AM  14 years agoPost 1
4A Vacation

rrNovice

Houston

My Posts: All  Forum  Topic

I have swaped a YS 61 for an 80 and have a problem with the fan touching the bottom of the shroud. I have reversed the engine mount added 1 and 2 washers and basicly made every change I can see in an attempt to resolve the issue. Has anyone experianced this and what did youo do. I am considering cutting the shroud under the fan to eliminate the problem. Any thoughts on this?

Any thoughts you have would be apreciated.

PM  EMAIL  GALLERY  Attn:RR  Quote
03-14-2003 09:43 AM  14 years agoPost 2
Mr. Mike

rrApprentice

Vienna, Austria

My Posts: All  Forum  Topic

Hi Chris!

I've also got the YS80 in my CS. No problems with the shroud. I did not reverse the engine mount and did not add any spacers. Only modification I made was the 10T pinion which I installed instead of the 9T for proper gear ratio.
Hope that helps.

Best regards
Mike

PM  EMAIL  Attn:RR  Quote
03-19-2003 06:21 AM  14 years agoPost 3
4A Vacation

rrNovice

Houston

My Posts: All  Forum  Topic

Problem solved thanks to Chad

Bought Heli used and fan was mounted on the bottom of shaft instead of the top. Evidently the shroud worked with the YS61 but when switched to the 80 no dice.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 735 views
Scorpion Power Scorpion Power
HelicopterJR Heli Vibe 90/50, Sylphide 90, GSR260 › Vigor cs Fan Shroud problem
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Sunday, November 19 - 10:43 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online