RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 695 views POST REPLY
Scorpion Power Scorpion Power
03-14-2003 01:29 AM  14 years agoPost 1
misio

rrVeteran

....

My Posts: All  Forum  Topic

.
..

PM  EMAIL  Attn:RR
03-14-2003 01:59 AM  14 years agoPost 2
hawkflier

rrApprentice

Cameron Park, Ca.

My Posts: All  Forum  Topic

wo nelly


That is all jacked up


I'll get back to ya soon, I'll check my settings and reply in the morning.

First off turn the revo all the way off if you have a gyro.

PM  EMAIL  HOMEPAGE  Attn:RR
03-14-2003 02:11 AM  14 years agoPost 3
James Cistola

rrElite Veteran

Orlando FL.!!!

My Posts: All  Forum  Topic

Yo Misio,,, To bad you can't come down to the Delaware. R/C field for help!!! I do know that there are guys up your way whoa might help. Just look in the members list under N.J. And drop them a E-Mail ... Good luck , and if you fing your self down this was on a weekend , Being your heli
James

If it's worth doing, then it's worth over doing

PM  EMAIL  GALLERY  Attn:RR
03-14-2003 02:57 AM  14 years agoPost 4
corey11

rrElite Veteran

Bay Area, California

My Posts: All  Forum  Topic

here we go...

READ YOUR MANUELS>>>>>>>>


Ok, after you read through your manuels, look at this.

Theses are your current settings.....

1-atv all at 100%
2-hovering pitch is 100%
3-rudder offset is off at 6%
4-revolution mix setting is off at 50%
5-hold is on at 25%
6-idle is on at 50%
7-hovering throttle 30%
8-pitch rate (normal, idle-up, hovering) is all at 100% on dual side
9-exp is at 0%
10-dual rate setting channel 1 and 2 on 80%


Heres what you should have......

1-atv all at 80%
2-hovering pitch is 0%(+5 degrees)
3-rudder offset is OFF at 0%
4-revolution mix setting is off at 0%
5-hold is on at 3%
6-idle is on at 0%
7-hovering throttle 30%(hovering rpm should be 1650)
8-pitch rate (normal, idle-up, hovering) is all at 100% on dual side
9-exp is at 0%
10-dual rate setting channel 1 and 2 on 0%

Ok, heres a tip. this will get you to the right pitch settings...... The link going from you sawshplate to your blade grips should be 4 inches 1 cm long. Once youve done that, do it to the other link! Now, you see the link going from the collective servo, to the black arm thing sticking out??? if you do, pop it off. make it 4 inches and 4 cm long. Now, back to the swash plate. On the blade grips, you see that little link? well, measure it to 1 inch, 6 cm. do the same for the other one.

Ok, your done measuring things. Now for your radio. ....

Normal-
Top>70
bottom>77

idle up-
top>70
bottom>100

throtle hold(t-hld)-
top>70
bottom>77

Hover>
0%


You got lucky, i wrote all my links lengths down, i suggest the same for you. Once your done doing all that, go fly and learn dam it!!

Theres you edition of " Helicopters for Dummies" (please dont take that wrong)

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
03-14-2003 03:41 AM  14 years agoPost 5
misio

rrVeteran

....

My Posts: All  Forum  Topic

....

PM  EMAIL  Attn:RR
03-14-2003 03:48 AM  14 years agoPost 6
misio

rrVeteran

....

My Posts: All  Forum  Topic

....

PM  EMAIL  Attn:RR
03-14-2003 04:05 AM  14 years agoPost 7
corey11

rrElite Veteran

Bay Area, California

My Posts: All  Forum  Topic

idle up is for 3-d. say you want 50 % for idle up. so that means, everything below half throttle is at 50 % throttle. so when your inverted, you have some throttle.

What i mean by the number is, when your in your radios menu, set up the pitch to what i said. that is why you need to look at your manuel and under stand the radio before trying. Its best to get someone to help you at a feild to.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
WATCH
 1 page 695 views POST REPLY
Scorpion Power Scorpion Power
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Thursday, September 21 - 10:29 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online