RunRyder RC
 4  Topic Subscribe
WATCH
 1 page 620 views
Scorpion Power Scorpion Power
HelicopterMain Discussion › Removing an old clutch liner ???
03-12-2003 11:06 PM  14 years agoPost 1
DJoyce

rrNovice

Alabama

My Posts: All  Forum  Topic

Any suggestions for removing an old clutch liner ?

Thanks

PM  EMAIL  GALLERY  Attn:RR  Quote
03-12-2003 11:16 PM  14 years agoPost 2
Dazzler

rrElite Veteran

Ohio

My Posts: All  Forum  Topic

It depends on how it was installed, if it was put in with epoxy just heat it up with a heat gun, and it should pull right out. If it was installed with JB weld you may be able to just scrape it out a little at a time. I've heard of some that just replace the bell when it is time to replace the liner, they claim they begin to run out of round after time.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
03-12-2003 11:21 PM  14 years agoPost 3
ARF

rrNovice

San Jose, CA

My Posts: All  Forum  Topic

...start the engine at full throttle...

PM  EMAIL  Attn:RR  Quote
03-12-2003 11:37 PM  14 years agoPost 4
Signman

rrApprentice

Bristol, Virginia

My Posts: All  Forum  Topic

ARF, been there, done that! Accident of course!

PM  EMAIL  GALLERY  Attn:RR  Quote
03-13-2003 12:16 AM  14 years agoPost 5
JCadwell

rrKey Veteran

Richland WA/ Morro​Bay, CA

My Posts: All  Forum  Topic

Chuck it in a lathe. Turn the liner out. Install new liner, turn to spec. Install.

Thanks, John Cadwell

PM  EMAIL  GALLERY  Attn:RR  Quote
03-13-2003 01:02 AM  14 years agoPost 6
gyan

rrKey Veteran

Surrey, BC Canada or​Blaine Wa.

My Posts: All  Forum  Topic

Plastic Beads

I removed mine with a plastic bead blaster (like a sand blaster but with plastic beads so it doesn't damage the substrate material)

PM  EMAIL  GALLERY  Attn:RR  Quote
03-13-2003 01:59 AM  14 years agoPost 7
Twobeers

rrKey Veteran

Toronto, Canada

My Posts: All  Forum  Topic

Box cutter & patience.

I lost my infamous tag line.

PM  EMAIL  GALLERY  Attn:RR  Quote
03-13-2003 03:50 AM  14 years agoPost 8
DrScoles

rrVeteran

Redmond WA

My Posts: All  Forum  Topic

Soak it in acetone for a while, then peel it out.... Not quite as cool as chucking it up in a lathe and drilling it out, but works well...

Mike

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 620 views
Scorpion Power Scorpion Power
HelicopterMain Discussion › Removing an old clutch liner ???
 Print TOPIC  Make Suggestion 

 4  Topic Subscribe

Friday, November 17 - 7:39 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online