RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 551 views POST REPLY
Scorpion Power Scorpion Power
HelicopterHIROBOOther › 99wc
03-11-2003 08:27 PM  14 years agoPost 1
pfisher

rrNovice

Las Vegas NV.

My Posts: All  Forum  Topic

Hi guys
looks like i just bought a 99wc with ys80 and the ssrVI head ................i'm looking for all soures of info for setup...........it is in a blackshark fuse if that matters.................will be used primarily for fai type flying........any help is greatly appreciated......................patrick

PM  EMAIL  GALLERY  Attn:RR
03-12-2003 04:27 AM  14 years agoPost 2
Chris.C

rrVeteran

Hong Kong

My Posts: All  Forum  Topic

I just put my Eagle WC into a BlackShark 2 body few weeks ago. It takes some time to adjust the CG and the horizontal fin for hands off FFF. It flies great in full throttle (YS80) but it trims down in half thottle. So far I tried the same mechanics and setup in pod and boom format that does not have this problem.

I did a search online but not much can be found for the BlackShark setup. I learnt from the Nuremburg show this year that for this body, it is best to use the low profile skid to reduce drag.

Cheers

Chris

PM  EMAIL  GALLERY  Attn:RR
03-12-2003 11:38 AM  14 years agoPost 3
Eagle

rrApprentice

Australia

My Posts: All  Forum  Topic

HI Chris,

Would you be able to tell me where you got your blackshark2 body from? I have looked everywhere for one but nothing info is around.


The only time success comes before work is in the dictionary!

PM  EMAIL  GALLERY  Attn:RR
03-13-2003 01:59 AM  14 years agoPost 4
Chris.C

rrVeteran

Hong Kong

My Posts: All  Forum  Topic

It was my friend who painted the body and installed the mechanics for me. Don't know where he got the body but it is a very nice paint job which makes me nervous to fly it(don't want to damage the body).

The reason I let him did the installation work is that he did that for more than 3 BlackSharks so he is more skilful than me. To make full use of the fuse, we need to separate the boom from the mechanics as the mechanics lean forward a bit and need to cut the carbon drive shaft short.

So far I tried less than 10 flights on it. Compared to my Freya WC with YS91, it is a little slow but very very quiet in full power flight. I want to run in the YS80 first before I make any adjustment.

Cheers

Chris

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 551 views POST REPLY
Scorpion Power Scorpion Power
HelicopterHIROBOOther › 99wc
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Saturday, September 23 - 4:38 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online