RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 833 views
Scorpion Power Scorpion Power
HelicopterGasser Model RC HelicoptersOther › Pitch ranges-Benzin
03-11-2003 06:59 AM  14 years agoPost 1
JestRR

rrVeteran

Florence, Oregon

My Posts: All  Forum  Topic

What are you guys runnin on your pitch ranges? I have a total of -9 to +12 at 100%-100%. to get 5 deg at the 3rd point/hover/mid stick I had to put 70% in. to get a normal (my normal) pitch range about -2 to +10 i had to put in:
Normal
92% 10 deg
81% 7.5 deg
70% 5 deg
55% 1.5 deg
40% -1.5

Hold
100% 12 deg
85% 9 deg
70% 5 deg
45% 0 deg
20% -5 deg

With all that but in there, now my ATV for the throttle are alot slower than the pitch. Should i reduce my ATV for the pitch,aleron,elivator??
I got the ATV's set for the Throttle to get 50% in the middle and about 90 up 87down. OR....are you guys just useing all your pitch ranges in both normal and hold at 100% and 100%???

its getting close!!!

Mike

Mike Spinner
Florence OR
SCALE JUNKIE!!
NORTHWEST SCALEWORKS

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
03-11-2003 05:37 PM  14 years agoPost 2
Billme

rrElite Veteran

MS

My Posts: All  Forum  Topic

Mike, are you running the standard 725 blades?

Sounds like you got close enough on the throttle....
In normal on the pitch...I would run -5 +5 +12 You may have to raise the hover a little more....

Don't worry about the speed difference in normal between the throttle and pitch..If you want to see it, go to idle up 1 ...
In idle up 1, you need to run the -9+5+12 if your going to 3D...
This is the reason I like the bellcranks on the CCPM, you could get more pitch out of them, and this combo needs it for 3D..
Bill

PM  EMAIL  GALLERY  Attn:RR  Quote
03-11-2003 09:05 PM  14 years agoPost 3
JestRR

rrVeteran

Florence, Oregon

My Posts: All  Forum  Topic

pitch

Bill, 725 blades
I have the CCPM frames with the servos under the main shaft. I'll raise the pitch at full and lower it at the bottom but from what you are saying, I'm in the ball park. I'm getting my ignition suppressor cap tomarow or the next day and I only have to make sure that my tail rotor is set up rught and its off to the races!!! once i get this flying , the raptor has to be picked back up and put back together!!

thaks for all your help. Most all us newbies really appreciate your help bill!!

Mike

Mike Spinner
Florence OR
SCALE JUNKIE!!
NORTHWEST SCALEWORKS

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 833 views
Scorpion Power Scorpion Power
HelicopterGasser Model RC HelicoptersOther › Pitch ranges-Benzin
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Friday, November 24 - 7:48 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online