Hey Guy's

I have just finished my new project. Synergy E9 - xl

Airborne will be today.

br
Prinzi

. Synergy E9-PeterTürk
. MPxl-e
. MP-E
. Robbe Nova Cuatro
. Schlüter Miniboy Bj 1987

very nice and now there are three that i know of

Very nice, where did you get the frames?

Congratulation Philipp, well done

@carcrasher
prinzi is one of our team, side frames from the E9 G10 prototype flown at the Vienna Toy Fair, where we presented the E9 Synergizer.
Prinzi is our software and hardware organizer, which has a N9 and could get an E9 too, but he is complete in Love with the big birds, he always wanted a E9 XL with 1,8m rotor.
With the bigger one he want to build a beautiful semi scale copter, so we will hear in future for sure some more from him.

The bird is flying very well and very performant. 1,8m rotor with 5,5kg.!

Configuration:

Actro 32/3 and Kontronik Power Jazz. 10 tooth pinion and Kokam 4000 12s

I'm mainly flying with 25% trottle which is approx 1300 rpm. 12 degree pitch is no problem for this setup but the tailrotor didn't hold on fullpitch. So I reduced for tests to 10 degree which is more than enough.

On a 10 minutes flight soft 3D where I had one half 25% trottle and one half 40% I consumed only 3100mAh !!!

next I will test longer tail blades and other pitch setups.

br
Prinzi

. Synergy E9-PeterTürk
. MPxl-e
. MP-E
. Robbe Nova Cuatro
. Schlüter Miniboy Bj 1987

Is the canopy a stock unit with a different windscreen outline or something available aftermarket? It is very mille-esque... I love it!

looks stock to me but been adapted and sprayed

Full CFK 109g, sprayed in Form, Philipp puted on a white strip

got any pics of the other side

how much are they for for an un painted one i had to addapt the standard one its a lot of work

no unpainted available, 73€ for a one color with CFK window 79€ for two colours and CFK window

i TAKE IT THAT PLUS SHIPPING AND DO U SHIP TO THE UK

f penfold
you got a mail and PM

Hi,

I have some additional fact's.

I measured the rotor speed.

Idle1: 11% throttle -> 1050RPM --> used for soft acrobatic flight and scale flight.
Idle2: 25% throttle -> 1170RPM --> Standard speed for my training. Enough performance in all situations.
Idle3: 40% throttle -> 1370RPM --> Very good performance for speedflight

Power Consumption:

10 Minutes flight 50% Idle2 and 50% Idle3 --> 3100mAh
Power saving flight:
10:40 Minutes flight Idle1: --> 2550mAh !!!

I hope the weather is getting better in the next day's that we can make a video.
br
Prinzi

. Synergy E9-PeterTürk
. MPxl-e
. MP-E
. Robbe Nova Cuatro
. Schlüter Miniboy Bj 1987

I am in the USA, and would be very interested in getting a set of those frames. Is anyone selling them yet?

@sparky
3 versions will be available, may be from Synergy direct, more in new year to this, after they have test flown the E9 CFK light which I will send out to them if the Streckers arive.

If Synergy don't like, I have to time:
E9 G10,
same design also as E9 CFK
and an E9 CFK light

E9 is for to use longer motors like Actro 32/3 and the battery is more safe because of solid lower frames.

E9 light, upper frames are shorter that's why are to use short motors like Strecker 435.30 Synergy
Or the cheap Kontronik Kora Top 32/12
Lower frames are minimized, battery should have an CFK or GFK upper and lower plate.

Prinzis one is a E9 G10, he made a 80mm extension for the tail boom and enlarged the 115-211 TransOutputShaft. He use an Actro 32/3 with 10T pinion.
In my XL CFK light I will use a Strecker 435 Synergy 14S and run him at 12S with a 15T pinion, so I can use him in both versions.

Strecker is producing his motor 435.30 Synergy with 30mm shaft to counter bearing him for extreme loads. Not a must to counter bearing him because of his 6mm shaft, but for a long haul it's a better thing.

Motor mount block, two to time, a 4hole at 25mm diameter, this one for Actro and the other one for Strecker and Kora Top.

Chrismas is in front of the door, so why not make a present from Austria to US, send me your adress.

*3DPP,

Thanks for the reply. I would be interested in the standard length version, since I would be using a Neumotor and need the extra length. So, either the E9 G10, or carbon frame would be my choice. Yes it would be a very nice Christmas present. If you think you could send me one, please PM me and we can figure out the logistics.

Best

Patrick

Hi,

here the first video of my E9 XL

http://www.rcmovie.de/view_video.ph...a2700556d42740d

Just some soft acrobatic maneuvers.

br
Prinzi

. Synergy E9-PeterTürk
. MPxl-e
. MP-E
. Robbe Nova Cuatro
. Schlüter Miniboy Bj 1987

but he is complete in Love with the big birds, he always wanted a E9 XL with 1,8m rotor.

Hello Peter and Prinzi. Now you really got me interested of the Synergy. With a 1,8m rotor and electric conversion the Synergy is a nice thing. Like Prinzi I have always liked the big helis too I'm planning to convert one of my Cuatros to electric, but your Synergy conversion looks excellent to me too.

Nice work guys!

Regards