RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 1064 views
11-30-2007 06:21 PM  10 years agoPost 1
eheliflyer

rrVeteran

NorCal

My Posts: All  Forum  Topic

Just picked one up the SAS. I plan on running (2) 3s 2200mah Air Thunder and Kong Power lipos. My motor is the Hyperion H3025-10 With a 19T pinion. I got the kit with the standard servos so I know this is overkill but I had 3 JR 8717 servos laying around so that is what I will be using on the cyclic. I had to dremel the frames a bit to make them fit because they are a bit larger than the regular servos. On the tail I am using the LogicTech 6100 combo.
I can't wait to fly this. Blades will be the Rotortech 430s and 68mm cf tail. I upgraded the head and tail to the full CNC.
I can't wait to get this baby flying.
I will post pics after the weekend.

PM  EMAIL  GALLERY  Attn:RR  Quote
12-01-2007 06:20 AM  10 years agoPost 2
kantut

rrNovice

nothing else

My Posts: All  Forum  Topic

sas is the better frame..imo.. i have the sah..hitec servos are too weak...i'd like to get the sas frame,,helidirect don't sell them anymore.....

PM  EMAIL  Attn:RR  Quote
12-01-2007 06:28 AM  10 years agoPost 3
eheliflyer

rrVeteran

NorCal

My Posts: All  Forum  Topic

HeliDirect still sells them check their site and you will see that they are in stock.

PM  EMAIL  GALLERY  Attn:RR  Quote
12-04-2007 03:56 AM  10 years agoPost 4
kva

rrNovice

Lithuania

My Posts: All  Forum  Topic

eheliflyer, so how was it going this weekend?

PM  EMAIL  Attn:RR  Quote
12-04-2007 04:20 AM  10 years agoPost 5
eheliflyer

rrVeteran

NorCal

My Posts: All  Forum  Topic

Kva I didn't get a chance to fly it. I am hoping to fly it on Thursday.

PM  EMAIL  GALLERY  Attn:RR  Quote
12-29-2007 07:56 PM  9 years agoPost 6
Grant

rrNovice

NEW ZEALAND

My Posts: All  Forum  Topic

Hi i am looking at this same set up. can you tell me how long the HDX will hover for. with your set up

PM  EMAIL  Attn:RR  Quote
12-30-2007 06:53 PM  9 years agoPost 7
eheliflyer

rrVeteran

NorCal

My Posts: All  Forum  Topic

Sorry I sold this before I flew it. Going with a different project.

PM  EMAIL  GALLERY  Attn:RR  Quote
01-03-2008 01:37 AM  9 years agoPost 8
audio131

rrVeteran

attleboro , mass , usa

My Posts: All  Forum  Topic

hi

hi,,i just ordered this kit,, i could not pass up the price for one,hope it is a good flyer, so,,you can run 2- 3cell packs in it ? 22v ? as long as you get a motor and esc that can run 22 v right? ,, i have 3 hitec 5985 dig servos that are 175 oz torque and .13 speed @6v--should be good enough-right?

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1064 views
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Friday, December 15 - 4:06 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online