RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 1044 views
HelicopterScale Model RC Helicopters › Info wanted : JR 9X2 radiosetup with turbine JetCat PHT-3
11-29-2007 10:27 PM  10 years agoPost 1
Totto

rrApprentice

Norway

My Posts: All  Forum  Topic

Hello !

I am about to setup my radio JR 9X2 with my Graupner turbine NH-90 with JetCat PHT-3.
Would appreciate much YOUR setup sequence i.e. on Normal. Idleup 1, 2 with a JR 9X 2 radio with JetCat PHT-3 . Startup switches, stop, emergency shutdown etc etc

Since this is my first turbine setup I would appreciate what to pay attention to.
DO and NOT do.

Thank you !


Best regards
Totto

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
11-29-2007 11:28 PM  10 years agoPost 2
PETER ROB

rrElite Veteran

Devon UK

My Posts: All  Forum  Topic

Totto,Throttle, there is no curve,Normal is Linear from 0 to 100, you will need this to learn RC
Stunt/Idle up 1 is 100% right across the top
Stunt/Idle up 2 is 100% right across the top
Throttle hold is set at around 30%
If you can follow the instructions then learn RC is easy enough, I use the little white button on the board with the LED's to enter the values
Peter R

PM  EMAIL  GALLERY  Attn:RR  Quote
11-30-2007 05:33 AM  10 years agoPost 3
WIRLYBIRD

rrVeteran

CAPE TOWN / SOUTH AFRICA.

My Posts: All  Forum  Topic

Hi Totto, glad to see you almost ready to go how bought a picture , sorry can't help you with the radio setup , as I fly with the German Graupner JR MC22 radio.The basics however are the same , be careful of the forward and back cyclic , it can be very twitchy in the hover see that you are able to have a switch for exponential pre adjusted to about 70% , you might need to hit that switch fast!!!
Dave.

WHAT GOES UP MUST SURELY COME DOWN.

PM  EMAIL  GALLERY  Attn:RR  Quote
11-30-2007 05:36 AM  10 years agoPost 4
WIRLYBIRD

rrVeteran

CAPE TOWN / SOUTH AFRICA.

My Posts: All  Forum  Topic

Half asleep meant to say how about a picture.
Dave.

WHAT GOES UP MUST SURELY COME DOWN.

PM  EMAIL  GALLERY  Attn:RR  Quote
11-30-2007 09:28 PM  10 years agoPost 5
Totto

rrApprentice

Norway

My Posts: All  Forum  Topic

Hello Peter R !
Thanks much for your info!
Yes I have read about the setups etc in the manual and the learn RC but just wanted inputs from others so that’s fine. Thanks again.

Hello Dave !
Thanks a lot !
Well It has gone very very slowly for some time now….. I will first do some testing in the bench etc to see that things works out the way it should. Want to see if the speed brake works as it should before I put it in the model. I never do a model “finish” until I have flown it for a while so the same with this one. December will be the month hopefully.
Here a couple of pic’s


Best regards
Totto

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 1044 views
HelicopterScale Model RC Helicopters › Info wanted : JR 9X2 radiosetup with turbine JetCat PHT-3
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Friday, December 15 - 6:03 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online