RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 543 views POST REPLY
Scorpion Power Scorpion Power
HelicopterHIROBOOther › THREE POSITION SWITCH - SW(C) - 9C Super radio system
11-29-2007 06:52 AM  9 years agoPost 1
HELYSEBY

rrNovice

SLOVENIA

My Posts: All  Forum  Topic

Hello;

I have mounted stabilizer on my helicopter Sceadu EVO50 ( general laser ). I connected a cable from sensor of stabilizer to Ch7 of my receiver (R149DP - ch7 - governor).I need three values of switch for remote administration of sensor of stabilizer.

Values are:
1.) Up position: from 1 to 100 % - depend upon wishes of reactivity of stabilizer
2.) Center position: 0 % - stabilizer inactive (off)
3.) Down position: -100% (negative number) - calibration in the air

I wonder, is such setting of SW(C) possible and if, how I do this?
I tested, but on this switch I am able to set only positive values.

Can you offer me some proposal? On receiver is still free Ch8 - Knob B. It is possible here to make something ?

Someone knows other solution ?

I am thanking you for your answers already in advance.

PM  EMAIL  Attn:RR  Quote
11-29-2007 01:48 PM  9 years agoPost 2
jbiter

rrKey Veteran

Sebring, FL

My Posts: All  Forum  Topic

Should work on channel 7 as long as you are not running the governor function using sw C as well.

In your basic menu, look at "AUX-CH" function. Check to see if channel 7 is controlled by sw C.

You can adjust the values as you wish by using the "END POINT" function. Scroll down until the little arrow is next to channel 7. Then adjust the value on either side of center by placing the switch in the desired position. Even though the display shows only positive numbers in the END POINT function it should work as you desire. The SERVO screen will show the results of your settings.

Jeff

PM  EMAIL  GALLERY  Attn:RR  Quote
11-30-2007 08:35 AM  9 years agoPost 3
HELYSEBY

rrNovice

SLOVENIA

My Posts: All  Forum  Topic

Thank you very much for your advice.

I am not running the governor, so there is no problem.
Not even tought on possibility of using "END POINT" function for channel. What a .

I will test case as soon as I came home. I believe that it will be succesful.

Once more thaks.

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 543 views POST REPLY
Scorpion Power Scorpion Power
HelicopterHIROBOOther › THREE POSITION SWITCH - SW(C) - 9C Super radio system
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Wednesday, October 18 - 12:06 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online