RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 353 views POST REPLY
Scorpion Power Scorpion Power
HelicopterRadio - Servo - Gyro - Gov - Batt › GV-1 setup with 9c
11-29-2007 01:45 AM  9 years agoPost 1
idigrc2

rrVeteran

Chico, CA

My Posts: All  Forum  Topic

Had a few questions about setup since the only gov I've been using is a revmax. Have the govener setup so that the screen reads the differnt head speeds when the idle up switch is fliped. What does the radio need to be set at as far as in the gov menu and do the throttle cruves need to be a 100% across the board or set in a cruve

I once choked a smurf to see what color it would trun

PM  EMAIL  GALLERY  Attn:RR  Quote
11-29-2007 04:44 AM  9 years agoPost 2
Girard Ibanez

rrVeteran

Tucson, Arizona (formally from Guam)

My Posts: All  Forum  Topic

http://www.runryder.net/helicopter/t376831p1/

The above Thread should answer all your question. Please review the last post by Gunner as I forgot to include a very important step in the setup.

Also, certain receivers may react different to the setup so you may have to switch channell 7 and 8 around to make it work as mention.

If the above thread works for you please post your results on that thread or move this thread over there for continuity.

Later I will incorporate / edit the steps and solutions that work. As of now, I do not have a GV1 so I cannot verify the setup. Thanks.

Girard


Team Thunder Tiger
since 6/2005 to 12/2014

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 353 views POST REPLY
Scorpion Power Scorpion Power
HelicopterRadio - Servo - Gyro - Gov - Batt › GV-1 setup with 9c
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Tuesday, October 24 - 3:18 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online