RunRyder RC
 0  Topic Subscribe
WATCH
 1 page 604 views
HelicopterCompass Knight 50 ODIN 90 › Can someone help me out with dimension of knight 3D canopy?
11-27-2007 08:17 PM  10 years agoPost 1
RappyTappy

rrProfessor

North Denver, Colorado

My Posts: All  Forum  Topic

I'm looking for the dimensions of the Kinght 3D canopy. I am mainly concerned with the width of the canopy at the bottom front(dark arrow) and the height and the length of the canopy. Also, probably the width about the middle of the canopy might be benificial as well.
Appreciate the help if you do, thanks

Edit: I found that this photo I used was the new canopy, I'm more interested in the older style canopy dimensions.

PM  EMAIL  GALLERY  Attn:RR  Quote
11-27-2007 08:40 PM  10 years agoPost 2
Dood

rrProfessor

Wescanson

My Posts: All  Forum  Topic

If you have seen the Avant FX/ EFX canopy, they are VERY close in size and shape.

The Knight 3D canopy is only slightly smaller, and just fits inside the Avant canopy.


  ▲
▲ ▲

PM  EMAIL  GALLERY  Attn:RR  Quote
11-27-2007 08:45 PM  10 years agoPost 3
Dood

rrProfessor

Wescanson

My Posts: All  Forum  Topic

I measure roughly 18.5" by 7.5"

  ▲
▲ ▲

PM  EMAIL  GALLERY  Attn:RR  Quote
11-27-2007 09:07 PM  10 years agoPost 4
RappyTappy

rrProfessor

North Denver, Colorado

My Posts: All  Forum  Topic

18.5" is height right ?

The width at the bottom is 7.5", approx. how far into the canopy going towards the nose does it stay that width before it starts tapering to the point of the nose?

Really appreciate the help Dood.

PM  EMAIL  GALLERY  Attn:RR  Quote
11-27-2007 09:26 PM  10 years agoPost 5
Dood

rrProfessor

Wescanson

My Posts: All  Forum  Topic

Alright Chris,

I traced my Knight 3D canopy on paper as best I could.
Im not sure what exactly you were asking, so I took a whole bunch of measurements.

BTW, when looking at the canopy nose-on, it is less than 4" wide, probably 3 3/4"

The point to point measurement you see that is covered up (on the bottom) that one is 12"

  ▲
▲ ▲

PM  EMAIL  GALLERY  Attn:RR  Quote
11-27-2007 09:31 PM  10 years agoPost 6
Dood

rrProfessor

Wescanson

My Posts: All  Forum  Topic

Edit: I found that this photo I used was the new canopy, I'm more interested in the older style canopy dimensions.
The dimensions I have provided you thus far are from the NEW canopy.
I don't have an old style canopy.

  ▲
▲ ▲

PM  EMAIL  GALLERY  Attn:RR  Quote
11-27-2007 09:42 PM  10 years agoPost 7
RappyTappy

rrProfessor

North Denver, Colorado

My Posts: All  Forum  Topic

Wow, above and beyond the call of duty Dood!

Seriously thanks, thats plenty enough info for me, lol.

Basically, reason for asking is I'm trying to see if it will fit on my heli that I made, first I mounted a Freya canopy on it, didn't look the hottest but worked at the time. Then I mounted a Aurora canopy that I had, fits good, but with a front mounted tank on my heli, the Aurora canopy is just too narrow at the bottom to fit a good size tank under the canopy. The knight canopy would be awesome if it will fit mainly because it is a good price and I'm all about saving money nowadays(want to buy a house soon). I do however fear the Knight canopy may be slightly too short for the tall mechanics structure and I'll probably end up mounting a Fury Stratus canopy on it, but I really do appreciate your time

My heli, the Fuze 90 MT prototype

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 604 views
HelicopterCompass Knight 50 ODIN 90 › Can someone help me out with dimension of knight 3D canopy?
 Print TOPIC  Make Suggestion 

 0  Topic Subscribe

Sunday, December 17 - 2:05 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online