RunRyder RC
 4  Topic Subscribe
WATCH
 1 page 597 views
HelicopterAlignOther › Kasama head
11-27-2007 03:35 PM  10 years agoPost 1
Big Pockets

rrApprentice

Pasadena, MD

My Posts: All  Forum  Topic

Has anyone tryed the Kasama head on the 600n? and if so how do you like it.

PM  EMAIL  GALLERY  Attn:RR  Quote
11-27-2007 03:46 PM  10 years agoPost 2
Arky

rrApprentice

Corfe Mullen, Dorset, UK

My Posts: All  Forum  Topic

yes I have one.

its very nice, a big improvement over the stock head, there is a minor problem with it though the jesus bolt is to low in the head block so the main shaft sticks though the head block and restricts the flybar carrier, i have a lathe and just turned 3mm of the top of the main shaft, problem fixed for me, I have told them about it but not sure if there fixing it, i haven't heard from them yet ?

Jason

Wee.Splat

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
11-27-2007 04:41 PM  10 years agoPost 3
tchavei

rrProfessor

Portugal

My Posts: All  Forum  Topic

I doubt you will unless you have direct contact with them. I had some questions about their tail rotor and got no response whatsoever. They probably too busy flying...

Tony


--------------------
"Perfection and patience usually walk side by side..."

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
11-27-2007 07:53 PM  10 years agoPost 4
Captain Crazy

rrApprentice

Wakefield, England

My Posts: All  Forum  Topic

How does it improve upon the stock Trex600 head?.

PM  EMAIL  GALLERY  Attn:RR  Quote
11-27-2007 11:05 PM  10 years agoPost 5
docjoe

rrElite Veteran

Stockton, CA United States

My Posts: All  Forum  Topic

Here's the link to my build thread:

http://runryder.com/helicopter/t385996p1/

The Kasama head literally has NO SLOP. It is by far the best machined head I have put together. It simply performs much tighter than the stock head. If you have the money and want something new (as well as the performance), then i'd recommend you seriously consider it! I also have the tail rotor grips, both bought at GrandRC, and the heli flies much better than it's ever done!

Joe
We haven't seen Colonel Angus around these parts for years!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
11-28-2007 06:19 AM  10 years agoPost 6
duceduc

rrKey Veteran

Saitama-Ken, Japan

My Posts: All  Forum  Topic

The head does look nice. Too bad I can't afford it.

Duc S
Do It! Do It!™
AMA:REVOMIX
RCK:24005615-01

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
11-28-2007 06:50 AM  10 years agoPost 7
Arky

rrApprentice

Corfe Mullen, Dorset, UK

My Posts: All  Forum  Topic

Dear Jason Sorry for the late reply.Its an affirmative that we will be shifting thebolt hole up in the head down to another 2-3mm..Basically the head is designed for our own helis but customers haverequested to bolt it on a Trex600, and its also compatiable but only needssome minor modifications thats all.In the near future this head will be universal to all helis that has amainshaft of 10mm. Best RegardsKasama
I email them about the bolt hole and this is there replie
The Kasama head literally has NO SLOP. It is by far the best machined head I have put together. It simply performs much tighter than the stock head. If you have the money and want something new (as well as the performance),
Thats the one thanks !

Jason

Wee.Splat

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
WATCH
 1 page 597 views
HelicopterAlignOther › Kasama head
 Print TOPIC  Make Suggestion 

 4  Topic Subscribe

Sunday, December 17 - 10:11 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online