My Posts: All Forum Topic
I have used this stuff on all three of my heli's. Rap 90,50 and Trex 450.
When you check out ReadyHeli you will see it's available in different sizes. It comes with some heat shrink tubeing to secure the ends.
The 1/4" is ideal for single servo wires and the 1/2" is ideal for grouping several wires together. Either when they are wrapped or unwrapped. Also notice that this sufff is available in a stainless steel sleeving. Ideal for fuel lines. I have even utilized it on all my 28 to 40 percent planes.
Now as to your question. "Could it rub the wire insulation and over time possibly short out a servo or any other bad things ?"
Well, the idea of useing this wrap to prevent that exact thing from happening. I am not aware of any other bad things with it's use.
Except maybe the steel sleeving. I suppose it could possibly rub or
vibrate on carbon fiber frames and potentially cause radio interference. But I haven't heard of it or experienced it. I have used the "poly" wrap on my heli fuel lines for the exhaust pressure line and the fuel pickup line from main tank to header tank as these to lines do come in contact with the carbon frames on the Rap 90.
" I...... LIKE IT "
Here when wanted.
There when needed.
Everywhere when looked for.