RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 419 views
HelicopterMain Discussion › TP-1010 and TP-205?'s
11-26-2007 12:44 PM  10 years agoPost 1
THX1138

rrElite Veteran

Camp Bondsteel, Kosovo

My Posts: All  Forum  Topic

How do I charge two 5s packs as one 10s pack? I have a Y- harness and my balancer supports 10s. What gets plugged into where?

Lou

Just give me five dudes and two flashbangs...

PM  EMAIL  GALLERY  Attn:RR  Quote
11-26-2007 01:02 PM  10 years agoPost 2
krashtagain

rrKey Veteran

ohio

My Posts: All  Forum  Topic

the instructions tell you how to wire 2 packs to charge at once , if you dont have the instructions let me know i'll copy mine and send them to you

If you're not living on the edge you're just taking up space !

PM  EMAIL  GALLERY  Attn:RR  Quote
11-26-2007 03:42 PM  10 years agoPost 3
bigdog714

rrVeteran

Rochester, MN U.S.A.

My Posts: All  Forum  Topic

Isn't it the same series connection you use when flying two 5S as a 10S

MD 800
Logo 600SE
Logo 14/500 Carbon
Ballistic 700
HD 500V2
Hirobo 50E
Avant 90E

PM  EMAIL  GALLERY  Attn:RR  Quote
11-26-2007 04:34 PM  10 years agoPost 4
THX1138

rrElite Veteran

Camp Bondsteel, Kosovo

My Posts: All  Forum  Topic

I guess what I am asking is where do I plug the packs into the balancer so that the charger recognizes all 10 cells. I can charge each pack as a 5s but it will not recognize all ten at once so I am guessing I have something plugged in the wrong spot. Any suggestions?

Lou

Just give me five dudes and two flashbangs...

PM  EMAIL  GALLERY  Attn:RR  Quote
11-26-2007 05:19 PM  10 years agoPost 5
daren

rrVeteran

Hampshire Sponsored by Quick UK

My Posts: All  Forum  Topic

Try plugging the balance lead in to port B first then the other 5s into port A.

Daren
Using the ground to reverse engineer

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
11-26-2007 06:17 PM  10 years agoPost 6
bigdog714

rrVeteran

Rochester, MN U.S.A.

My Posts: All  Forum  Topic

If you use the series plug the charger is looking to acheive a specific voltage for a 10S at 4.2v per cell around 42v charged, with two TP 205 balancers each 5S will be hooked to balancer keeping each battery in proper balance, you will not be able to hook the data port from a balancer to the charger for it will confuse it and stop charging, the 205s are just as efficient with or without the data port connected. I don't have TP 1010, so there could be another option.

MD 800
Logo 600SE
Logo 14/500 Carbon
Ballistic 700
HD 500V2
Hirobo 50E
Avant 90E

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 419 views
HelicopterMain Discussion › TP-1010 and TP-205?'s
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Wednesday, December 13 - 3:10 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online