Putting a new ring in tomorrow

Watch at YouTube

600LE,OS55,OS PowerBoost pipe,Align 610's,Spartan

That baby was screamin! A little lean eh?

Nick
If the wings are traveling faster than the fuselage, it's probably a helicopter

Yeah .I knew it needed a new ring cause she was low on compression from the guy I got it from but yesterday the bottom plug came out of my tune pipe and finished it.I put a plug back in today and JB welded the crap out of it hoping to get a few flight in but half way through the tank I landed to check the temp and it was at 202F so I richened it another 2 turns just to finished what I had left and had my buddys GF record that last part.I just finished pulling the whole motor apart and everything is perfect but the ring so im buying a new ring and piston tomorrow then I know everything is new cause when I got the heli the bearings were bad so I replaced them hoping the ring would get me through the summer .In a way im glad I didnt after this happend.No matter how much I turned the high end out the motor didnt have enough back pressure to feed the fuel to the carb..

600LE,OS55,OS PowerBoost pipe,Align 610's,Spartan

Great group of guys

Good flyin yesterday guys. The angus burgers were good but tore my gut up- every burp was like eating a nother burger again.
Sled head where did ya GO?
PoPs , you gots ta do bizzness during the week NOT the weekend!
Dialagyro, No sight of you either
I might have to hire Eric for my Tree Service, Ill have to glue on some chainsaw teeth on the end of his blades for a cleaner cut..
T-bone ,Thanks for letting me RIP around the 700
Zolen, BURP- another burger?
Brandy, good nipple ing
Steve sr, wanted to see the rappy go!
Nick--- SMACK SMACK SMACK DOWN
Chief There at 7:30 AM and tearing it up at 8:30AM
Newmans Knife would not cut the chain the wife put on him
Thanks Guys,

When pǝʇɹǝʌuı ,down is up and up is exspensive!

Mr. Review(Lars)

Nice review of the days events, Lars, ya gotta try the Cookie burger, never a burp with that baby. Thanks Guys had a great day, 5 flights in one day, a record for me!.

I'm not a pilot, I'm a crash facilitator!

I figured out why scooter has been having issues...... He's a sipper!

http://www.youtube.com/watch?v=AW6X39fVClw&NR=1

Keep the blades spinnin and the beavers grinnin- Burt Renolds (1977)

Lars, That would add a whole new meaning to Rippin! Think how many trees we could prune in such a short time.

You know I have been out to get that tree from the start

Sincerely,

Barkbuster

Keep the blades spinnin and the beavers grinnin- Burt Renolds (1977)

New Meaning

That gives a new meaning to being on the nipple!

I'm not a pilot, I'm a crash facilitator!

Yeah no kidding, I think I might have to get on the nipple more these days too

BTW, sometimes I think you guys have too much free time on your hands. Anyone want some papers to write?

Nick
If the wings are traveling faster than the fuselage, it's probably a helicopter

papers

Im knot sur u want US writin yur papers 4 ya, Chief

I'm not a pilot, I'm a crash facilitator!

Nipple

Ma-Ma

NW MI HELI / TRAMPS FUN FLY

May 16-17 are the official dates for the fun fly this year! Saturday the 16th will be the main day, however, feel free to stay overnight and fly on Sunday also! There will be night flying on Saturday night also.

Official start time is 10AM. It ends when we run out of fuel/parts/helis.

Concessions will probably be available, still working out the details.

There is a possibility of a couple Futaba/Align/Synergy sponsored pilots making it up for the fun fly, again, no promises... I am still working that out also. I am going to see about a visit from the USCG again also.

It will be held at the Rennie School Rd. field just south of Traverse City. Rennie Field is located 6 miles south of downtown Traverse City on the north side of Rennie School road just west of U.S. 31/M37 with two 500' x 50' runways running North/South and East/West.

Bring the family up and enjoy beautiful Traverse City for the weekend! There is plenty of shopping, beaches, and lodging available!

PASS THE WORD!
AMA Required

Contact me with questions/comments.

wings19@hotmail.com
http://www.traversemodelpilots.com

Nick
If the wings are traveling faster than the fuselage, it's probably a helicopter

I will be there. Both days most likely. Matznick has offered to let me stay at his cabin so I can come. Hopefully I will have the 90 done in time. Im am getting some money saved up now and things are lookin good for having it done by May!

Has anyone seen my 450? Jus Kidin. Holy CRAP it was windy yesterday!

When pǝʇɹǝʌuı ,down is up and up is exspensive!

Its not in Kansas any more?

Keep the blades spinnin and the beavers grinnin- Burt Renolds (1977)

Hey TreeBark, maybe you should learn to fly in Kansas, few trees to worry about out there.

RapRexSynLog Pilot

Hey least I can still get it up oldmanarotor, only thing i see you flyin is your mouth............ Oooooooooooo Snap!

Would all the weight of a CSM gyro given me enough centrifugal force to make it thru the tree unscathed? Or would Sirrus servos inaccuracy have put me far enough off track I wouldn't have hit it?

I'm open to suggestions

Keep the blades spinnin and the beavers grinnin- Burt Renolds (1977)

May

I'm planning on being there, Chief

I'm not a pilot, I'm a crash facilitator!

Wednesday night helis in TC

Also don't forget, we will still be doing the Wednesday night heli's in TC also. Let's get that going again soon, the field is cleared now.

Nick
If the wings are traveling faster than the fuselage, it's probably a helicopter

OMG

Hey least I can still get it up oldmanarotor, only thing i see you flyin is your mouth............ Oooooooooooo Snap!

Would all the weight of a CSM gyro given me enough centrifugal force to make it thru the tree unscathed? Or would Sirrus servos inaccuracy have put me far enough off track I wouldn't have hit it?

Wow no retorque on that one yet????

Steve