RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 525 views
Scorpion Power Scorpion Power
HelicopterMiniature Aircraft Whiplash & Fury 55 › Noise filter for Elevator servo.
09-17-2007 05:22 AM  10 years agoPost 1
hansuha

rrNovice

Republic of Korea

My Posts: All  Forum  Topic

Recently, I'm rebuilding my old X-Cell SE. The current building stage is on radio installation including servo.

Do I have to use a noise filter for the elevator servo? I choose Hitec HS-635HB analog servo for the elevator. It's not digital servo, but it has long servo wire to plug in Rx.

I suffered from glitch problems with this heli when the heli was flying. So, I'm very worried about the glitch problem.

Any advice would be thanksful.

PM  EMAIL  Attn:RR  Quote
09-17-2007 06:06 PM  10 years agoPost 2
Dr.Ben

rrMaster

Richmond, VA, USA

My Posts: All  Forum  Topic

Such devices are never a bad idea as long as you use a quality one, but they really aren't a requirement for the model unless you're flying a 12/14MZ with RF G3 receiver. If you've had glitch/lockout issues with that model, I can suggest a dozen things to look for before I'd implicate the length of the servo lead.

Ben Minor

PM  EMAIL  GALLERY  Attn:RR  Quote
09-18-2007 04:57 AM  10 years agoPost 3
hansuha

rrNovice

Republic of Korea

My Posts: All  Forum  Topic

Thanks for advice. Dr.Ben.

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 525 views
Scorpion Power Scorpion Power
HelicopterMiniature Aircraft Whiplash & Fury 55 › Noise filter for Elevator servo.
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Tuesday, November 21 - 2:05 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online