RunRyder RC
 0  Topic Subscribe
WATCH
 1 page 419 views POST REPLY
Scorpion Power Scorpion Power
HelicopterHIROBOOther › Evo 50 Clutch Liner
09-16-2007 03:27 AM  10 years agoPost 1
rudyy

rrElite Veteran

E. Amherst, NY

My Posts: All  Forum  Topic

I just get the clutch liner but not sure which side I should apply clue as both sides look the same. Does it really matter?

Rudy

PM  EMAIL  GALLERY  Attn:RR
09-16-2007 03:48 AM  10 years agoPost 2
Leif

rrElite Veteran

USA

My Posts: All  Forum  Topic

Nope. The liners I installed were identical on both sides. Pick a side and install.

For proper installation, first wrap your clutch with a layer of electical tape. Then install the liner with 30-minute epoxy and use the clutch to hold it in place. This gives you the proper clearance between the clutch and liner.

Once the glue has dried, trim the liner even with the bell. Don't forget to remove the electrical tape from the clutch before reassembling everything.

Leif

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 419 views POST REPLY
Scorpion Power Scorpion Power
HelicopterHIROBOOther › Evo 50 Clutch Liner
 Print TOPIC  Make Suggestion 

 0  Topic Subscribe

Monday, September 25 - 4:19 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online