RunRyder RC
 4  Topic Subscribe
WATCH
 1 page 1092 views POST REPLY
Scorpion Power Scorpion Power
Helicopter
e-
Thunder Tiger
Raptor E325 › Who here is using the axi cooler for their Mini Titan?
09-14-2007 10:05 PM  10 years agoPost 1
Lowezz

rrApprentice

Canada

My Posts: All  Forum  Topic

I want to get one of these cooling heads for my stock Mini Titan motor from Tower Hobbies as others here have said it does a good job of keeping the stock motor operating at a much cooler temperature. They have two kinds one is the AXI2820 and the other is the AXI2208. Anyone here know which is the proper one? Thnx!

PM  EMAIL  GALLERY  Attn:RR
09-14-2007 11:00 PM  10 years agoPost 2
Gus

rrApprentice

Aloha, Oregon

My Posts: All  Forum  Topic

The AXi 2820 and 2208 are Brushless Motors not cooling heads! These would replace you stock Mini Titan Motor.
Gus...

EVO 50E/N, Lepton, Mini-Titan, Flybarless Beam E4, X-3D-UFO, Y-UFO, SlowHawk Orthinopter

PM  EMAIL  Attn:RR
09-15-2007 01:56 AM  10 years agoPost 3
trunkmunki

rrApprentice

Bangor

My Posts: All  Forum  Topic

The cooler for the 22xx is the right one. I don't remeber what site it was that listed the dimensions of it, but you want the 28mm (approx) diameter fan. The 28xx is like 34mm or something like that...way too big for the stock e325 motor. you will have to file a few of the vanes down a bit to get it to fit, I filed the 3 vanes that line up with the screw holes so it would rest on the endbell, then filed the others so the center of the fan would rest on the bearing "bump." Took about 10 minutes, and I used the screws that came with the fan. Make sure to locktite.

PM  EMAIL  Attn:RR
09-15-2007 02:48 AM  10 years agoPost 4
denheli

rrVeteran

aurora,co

My Posts: All  Forum  Topic

I thought about the same fan for the MT motor but decided to get an Align 3550kv motor with the fan inside. Longer flight times, esc is cooler and batt. temps are way down. This works for me

Always Learning LOGO 400 V-bar, TT R50 V2 Blue, RJX Xtreme 50, Vibe 50N, TZ Frenzy 50.

PM  EMAIL  GALLERY  Attn:RR
09-15-2007 03:46 AM  10 years agoPost 5
Lowezz

rrApprentice

Canada

My Posts: All  Forum  Topic

thnx guys!

PM  EMAIL  GALLERY  Attn:RR
09-15-2007 05:22 AM  10 years agoPost 6
xxcysxx

rrKey Veteran

Baltimore, MD - USA

My Posts: All  Forum  Topic

i did this mod for a while and it work great for me.

axi cooler what a difference !

when you mount the fan on the motor, tighten the three screws lightly so you can still move the fan side to side to check motor balance. just spin it up a few times to check for vibration. when the motor spin really smooth without any noticeable vibration, gently tighten all three screws.

2 cents

Tam

PM  EMAIL  Attn:RR
09-15-2007 02:44 PM  10 years agoPost 7
Hazy

rrNovice

Singapore

My Posts: All  Forum  Topic

Hi Denheli,does the align 430L 3550KV motor has the same power as the stock motor?

PM  EMAIL  Attn:RR
09-15-2007 05:17 PM  10 years agoPost 8
denheli

rrVeteran

aurora,co

My Posts: All  Forum  Topic

Hazy, I found that the Align motor has more power than the MT stock. It does great for what I need it to. Then again I am still learning. Only had this heli since mid-June and working on FF. Had an Align 4050kv but that was way too much crazy power for me! I like the 3550 with the Align 35amp ESC. Thinking og getting a Trex now.

Always Learning LOGO 400 V-bar, TT R50 V2 Blue, RJX Xtreme 50, Vibe 50N, TZ Frenzy 50.

PM  EMAIL  GALLERY  Attn:RR
09-15-2007 06:17 PM  10 years agoPost 9
Hazy

rrNovice

Singapore

My Posts: All  Forum  Topic

Thank for your reply Denheli.What pinion are you using on the align motor and what yuor flight time?

PM  EMAIL  Attn:RR
09-16-2007 12:39 AM  10 years agoPost 10
TRACERBOB

rrVeteran

Closer than you think

My Posts: All  Forum  Topic

I fit one to. Had to do a little trimming to make it fit but it was well worth the effort.

PM  EMAIL  GALLERY  Attn:RR
09-16-2007 02:42 AM  10 years agoPost 11
denheli

rrVeteran

aurora,co

My Posts: All  Forum  Topic

Hazy, I am running a 12tooth pinion and my flight time runs 6-7 min. in hoovering and some FF. still learning though.

Always Learning LOGO 400 V-bar, TT R50 V2 Blue, RJX Xtreme 50, Vibe 50N, TZ Frenzy 50.

PM  EMAIL  GALLERY  Attn:RR
09-16-2007 04:56 PM  10 years agoPost 12
Hazy

rrNovice

Singapore

My Posts: All  Forum  Topic

Have anyone tried using JGF500SH with stcok setup?how the flight time?

PM  EMAIL  Attn:RR
WATCH
 1 page 1092 views POST REPLY
Scorpion Power Scorpion Power
Helicopter
e-
Thunder Tiger
Raptor E325 › Who here is using the axi cooler for their Mini Titan?
 Print TOPIC  Make Suggestion 

 4  Topic Subscribe

Tuesday, September 19 - 7:57 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online