RunRyder RC
 7  Topic Subscribe
WATCH
 1 page 1004 views TOPIC CLOSED
Scorpion Power Scorpion Power
HelicopterAlignOther › RealFlight ->> Trex 600 Nitro Pro - "VERSION 8"
09-14-2007 12:23 PM  10 years agoPost 1
stuartmp74

rrApprentice

Gold Coast, Australia

My Posts: All  Forum  Topic

Try the New & Improved, Trex 600 Nitro Pro - "VERSION 8"

New Level of detail one the Side frames & Fins.
I also re-modeled the bevel Gear Tail housing

This Trex was modeled from my new actual Model. All dimension & Mass are accurate. I taught myself 3ds Max during this process, What a great program.

Try the Red color Scheme as well.
As Special Thanks to Chris ->> fsusmithc2 on heli-freak for supplying the photo's

I hope everyone who downloads this model enjoys it.

http://www.knifeedge.com/forums/dow...do=file&id=3020

Check back as I am sure to update things.
Post request to me if you like an Update, I will do them as I get time.
(2930 Downloads of Previous versions)

All feedback comments are welcome
Post request to me if you like an Update, I will do them as I get time

PM  EMAIL  GALLERY  Attn:RR
09-14-2007 12:59 PM  10 years agoPost 2
jester4

rrKey Veteran

Brampton, Ontario

My Posts: All  Forum  Topic

Wow, nice work! Now you have to make one of my predator

See what happens when you do a good thing

PM  EMAIL  GALLERY  Attn:RR
09-14-2007 02:20 PM  10 years agoPost 3
raptorheli2

rrElite Veteran

rip off britain and no changing it

My Posts: All  Forum  Topic

i hope a synergy is in your plans...long long long overdue for g3...especially given todd bennet seems ot be affiliated ot both.

cheers


www.waterfoothelis.com

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
09-14-2007 09:58 PM  10 years agoPost 4
aliensil

rrApprentice

Laredo Tx

My Posts: All  Forum  Topic

Hi Stuart

Any suggestion to increase the piro rate on the 600N?

How about a Caliber5 for RF?

Flying pigs 8,000 feet above Sea level

PM  EMAIL  Attn:RR
09-14-2007 10:10 PM  10 years agoPost 5
rob_k

rrApprentice

Castle Rock, CO

My Posts: All  Forum  Topic

Sweet!!! Nice job.

PM  EMAIL  GALLERY  Attn:RR
09-18-2007 08:25 PM  10 years agoPost 6
MrMel

rrProfessor

Gotland

My Posts: All  Forum  Topic

Hi,

With this new version as soon as I start the simulator, or go into editor/exiting the editor I get "Creating DDS.."

Quite annoying, any ideas why?

PM  EMAIL  GALLERY  Attn:RR
09-18-2007 08:47 PM  10 years agoPost 7
stuartmp74

rrApprentice

Gold Coast, Australia

My Posts: All  Forum  Topic

I will look into it mine is not doing it!

I will try another P.C. and get back to you.

Is anyone else having the same problem?

PM  EMAIL  GALLERY  Attn:RR
09-18-2007 08:48 PM  10 years agoPost 8
MrMel

rrProfessor

Gotland

My Posts: All  Forum  Topic

My friend got he same problem on his computer.
(both had v7 and installed v8 if that could be something?)

PM  EMAIL  GALLERY  Attn:RR
09-18-2007 09:15 PM  10 years agoPost 9
Anthony.L

rrElite Veteran

Seattle, WA

My Posts: All  Forum  Topic

Same here, constant "Creating DDS" messages.

I like this model a lot with a couple tweaks. Increased the piro rate for my taste, was way too slow. Also increased the torque points on the motor slightly, felt down on power compared my mine in real life.

PM  EMAIL  GALLERY  Attn:RR
09-19-2007 08:45 AM  10 years agoPost 10
stuartmp74

rrApprentice

Gold Coast, Australia

My Posts: All  Forum  Topic

I am working on the DDS Problem now
Will have an update soon
Look out for V9

Sorry about the all the updates, its just hard to test when you have all the source files on my p.c.

I will move all the source files onto another drive before I test & Post.

I will also have a friend Verify before posting the next version.

PM  EMAIL  GALLERY  Attn:RR
09-19-2007 01:49 PM  10 years agoPost 11
"Iceman"

rrNovice

Kuala Lumpur, Malaysia.

My Posts: All  Forum  Topic

I've been thinking to get Knight 3D soon....But after downloaded This Trex600N yesterday and tested on G3 sim, its kind of difference feeling with heli.

Do the real heli response feel the same ??

Difference i feel on sim :

Fast cyclic response during manuveur with hard 3d moves...compare to 2 other heli *Knight50 and Raptor50 Titan*....

PM  EMAIL  Attn:RR
09-19-2007 01:54 PM  10 years agoPost 12
MrMel

rrProfessor

Gotland

My Posts: All  Forum  Topic

A heli in a simulator will NEVER feel like YOURS until you either tweak the simulator or tweak your heli.

(I usually tweak my simulator)

Want more cyclic speed, change the setting, less, same thing.
Just like you raise or lower your swash setting in your radio for your real heli.

PM  EMAIL  GALLERY  Attn:RR
09-19-2007 02:15 PM  10 years agoPost 13
Kristoffer

rrApprentice

Sweden

My Posts: All  Forum  Topic

I also have the creating DDS file same problem.

Things I want for next model is:
Faster tail. I have max out mine now at 1000 deg/sek and its still way to slow.

Also slightly fast cycklic I had to set the paddel weight around 12 grams now to get the same cycklick speed that i have on the real thing.

Also you can set the default pirro startrate at around 4000 deg/sek otherwise the tail feels strange.

And maybe slightly more torque on the motor it maybe bog a little to much now, but just a little. :-)

And I still get slightly wobbles on the rotor disc on the ver 8 heli. I hope that on ver 9 that its totaly gone. ;-)

Other than that a very good simulation on the heli! keep up the good work!

2xStratus, Gy611, ATG, YS91SR, SB19
Logo 14, Jazz 55, Hacker A50, 720
Wildcat 30
V-blades

PM  EMAIL  GALLERY  Attn:RR
09-21-2007 09:11 AM  10 years agoPost 14
stuartmp74

rrApprentice

Gold Coast, Australia

My Posts: All  Forum  Topic

See Version 9

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 1004 views TOPIC CLOSED
Scorpion Power Scorpion Power
HelicopterAlignOther › RealFlight ->> Trex 600 Nitro Pro - "VERSION 8"
 Print TOPIC  Make Suggestion 

 7  Topic Subscribe

Thursday, September 21 - 3:15 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online