RunRyder RC
 4  Topic Subscribe
WATCH
 1 page 910 views POST REPLY
Scorpion Power Scorpion Power
Helicopter
e-
Mikado
Logo 500 › Flew my Logo 500 3D for the first time today
09-14-2007 12:27 AM  10 years agoPost 1
Raydee

rrKey Veteran

Western New York

My Posts: All  Forum  Topic

Well I flew my Logo for the first time today. I planned on just hovering it around and getting a feel for the heli. I was very suprised how smooth it felt and how nice it flew. It did feel a little blah compared to my other Electric heli BUT I am sure it was due to my setup. I decided to run 500mm blades and a 21 tooth pinion knowing that the head speed would most likely be on the low side. All I know is I had no problems with the Z30-1100kv motor and mod .5 gears, the pinion was cool after my 4 min flights and my electronics were barely warm. I am going to shoot up to a 22 tooth for this weekend and give it another go. So far I really love this heli,not only the way it flies but the electronics setup, battery tray and the canopy.

The Future of Nitro is ELECTRIC

PM  EMAIL  GALLERY  Attn:RR
09-14-2007 03:04 AM  10 years agoPost 2
Ronald Thomas

rrMaster

Gainesville, Fl, USA

My Posts: All  Forum  Topic

What's your setup? I just ordered mine and I can't wait! My setup:
Logo 5003D
Z-Power Z30A 800 KV
CC85 HV ESC
10s A123
(3) Futaba 9252
Gy401/9254
CoOl BEC
Rototech 550mm blades
Berg 7P
It should be pretty ballistic!

Team MikadoUSA 480XXTreme, 550SX, 600SX, 700XXTreme, 800XXTreme!!

PM  EMAIL  GALLERY  Attn:RR
09-14-2007 03:35 AM  10 years agoPost 3
ahin

rrNovice

Hong Kong

My Posts: All  Forum  Topic

I would like to order nearly the same as u...
But I would like to try the servos S9650 servos & Kontronik Jazz 55-10-32. I am not familiar with Zpower 30A motor, maybe I gonna try too.
Do u think it can handle 10S A123?
Also, Where u order from?

Thanks

Raymond.

PM  EMAIL  Attn:RR
09-14-2007 07:19 AM  10 years agoPost 4
OICU812

rrMaster

Edson, Alberta, Canada

My Posts: All  Forum  Topic

550 blades make a "HUGE" difference, beleive me you! Try some 550 Rotortechs and you will be a happy camper! Also yes definetely up that pinion to 22 tooth for sure, shoot for 2250 on the head in idle 2, that and 550s make this heli an animal.

...Once upon a time there were Nitros, flybars and frequency pins...

PM  EMAIL  GALLERY  Attn:RR
09-14-2007 07:21 AM  10 years agoPost 5
OICU812

rrMaster

Edson, Alberta, Canada

My Posts: All  Forum  Topic

I would like to order nearly the same as u...
But I would like to try the servos S9650 servos & Kontronik Jazz 55-10-32. I am not familiar with Zpower 30A motor, maybe I gonna try too.
Do u think it can handle 10S A123?
Also, Where u order from?

Thanks

Raymond.
Raymond,

Go full size servos man, alot better flying with them, also the Z30A-800 ron lists will handle 10SA123 as it is nearly same as 8S lipo so that would be the motor to have, that and 153T main gear, which is mod.7 adn a 16tooth mod.7 will yield you close to 2300 at 75-80% governed. Cheers.

...Once upon a time there were Nitros, flybars and frequency pins...

PM  EMAIL  GALLERY  Attn:RR
09-14-2007 09:09 AM  10 years agoPost 6
ahin

rrNovice

Hong Kong

My Posts: All  Forum  Topic

Sorry to ask a stupid question: I can understand well with the number of tooth on the Gear, But what is mod.?

PM  EMAIL  Attn:RR
09-14-2007 12:39 PM  10 years agoPost 7
Motions

rrVeteran

Tallahassee, FL

My Posts: All  Forum  Topic

Module (mod) is the tooth size and is the number of mm of pitch circle diameter (p.c.d.) per tooth. Basically it's how large the teeth are.

_______
Scott M
Team Mikado USA

PM  EMAIL  HOMEPAGE  Attn:RR
09-16-2007 03:27 AM  10 years agoPost 8
Ronald Thomas

rrMaster

Gainesville, Fl, USA

My Posts: All  Forum  Topic

Also, Where u order from?
I got mine from Aeromodel. However you might want to wait for the new kits as they will include the .5 AND .7 mod gears as well as the aluminum motor mount. I had to pay extra for my .7 mod gear and pinion. If you want them, they are about $40 for the .7 mod gear and pinion....Ron

Team MikadoUSA 480XXTreme, 550SX, 600SX, 700XXTreme, 800XXTreme!!

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 910 views POST REPLY
Scorpion Power Scorpion Power
Helicopter
e-
Mikado
Logo 500 › Flew my Logo 500 3D for the first time today
 Print TOPIC  Make Suggestion 

 4  Topic Subscribe

Sunday, September 24 - 6:36 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online