RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 533 views POST REPLY
Scorpion Power Scorpion Power
Helicopter
e-
Align
T-REX 450 › Which channels do I plug my servos in?
09-13-2007 08:51 PM  10 years agoPost 1
tamuco

rrApprentice

Logan, Utah-USA

My Posts: All  Forum  Topic

I am putting together a T-Rex SE and I plugged in my servos and it seems that they aren't working correctly. I have a JR 10x radio with a xps module in it and the 8 channel xps receiver. Can anyone tell me the proper channels to plug the servos in and which servos they are as in right cyclic in channel? left cyclic channel? rear cyclic channel?

PM  EMAIL  Attn:RR
09-13-2007 09:08 PM  10 years agoPost 2
cwright

rrKey Veteran

Blossvale New York

My Posts: All  Forum  Topic

Mine are plugged in as follows. Right cyclic servo into channel 2. Left cyclic servo into channel 6. Elevator servo into channel 3. Then check the movement of the swashplate. If when you gie it right cyclic both servos move the same way reverse the one that is going the wrong way. If both servos are moving opposite each other but the wrong way go to the swash plate menu and if it is +60 for ailerons change it to -60. Do the same thing for aft cyclic and pitch. Hope this helps. Chuck

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 533 views POST REPLY
Scorpion Power Scorpion Power
Helicopter
e-
Align
T-REX 450 › Which channels do I plug my servos in?
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Monday, September 25 - 3:44 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online