RunRyder RC
 9  Topic Subscribe
WATCH
 2 pages [ <<    <    ( 1 )     2     NEXT    >> ] 5870 views POST REPLY
Scorpion Power Scorpion Power
Helicopter
e-
BEAM
BEAM E4 › The Beam E4
09-12-2007 09:47 PM  10 years agoPost 1
zx12r00

rrNovice

Australia

My Posts: All  Forum  Topic

what servo would be best used on the rudder ?
im going to run 401 but not sure whether to use the s9254 that comes with it or something else?

does the 9254 fit in the mount ?

PM  EMAIL  Attn:RR
09-12-2007 10:31 PM  10 years agoPost 2
Darren Lee

rrElite Veteran

Woodstock, GA

My Posts: All  Forum  Topic

I assume this is the new 450 size heli...

If so, the 9254 is way too big and would not be recommended by most. Better off to get the 401 without a servo and use 9650 or 9257.

PM  EMAIL  GALLERY  Attn:RR
09-12-2007 10:59 PM  10 years agoPost 3
E - 4

rrNovice

Australia

My Posts: All  Forum  Topic

cool my E4 is on the way

ill be watching this topic with interest
curious to know what others are gonna run

PM  EMAIL  Attn:RR
09-13-2007 06:28 AM  10 years agoPost 4
E - 4

rrNovice

Australia

My Posts: All  Forum  Topic

just in case you are interested i found the manual and parts list for the e4

http://www.sanitware.com/Download/B...%20&%20List.pdf

http://www.sanitware.com/Download/Beam%20Manual.pdf

PM  EMAIL  Attn:RR
09-13-2007 01:05 PM  10 years agoPost 5
red_z06

rrProfessor

Dumont, NJ

My Posts: All  Forum  Topic

Thanks for the manual. I had to build mine before the manual was ready.

The only part you should keep your eyes on is the tail slider 42-1417. Unlike other helis where the ball is separate, this heli uses a single machined part. It is made of aluminum so the ball will wear and develop slop. So, have the spare part ready.

We are using LogicTech 2100T with Futaba 9650 at the moment. We are waiting for the LogicTech matched micro servo for the tail. Korean test pilots have swithed from 9650 to this one. Hitec version of the rebadged LogicTech gyro/servo combo shoud work well too.

As for the cyclic 65hb or 65mg.

For the power we are using NeuMotors 1107/1.5y 3850kv with 12T pinion. After the flight, the temp is no more than 10deg higher than ambient.

www.JustinJee.com

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
09-13-2007 01:20 PM  10 years agoPost 6
Darren Lee

rrElite Veteran

Woodstock, GA

My Posts: All  Forum  Topic

It is made of aluminum so the ball will wear and develop slop.
Nothin new there! The Align slider has a separate steel ball and it develops plenty of slop!

PM  EMAIL  GALLERY  Attn:RR
09-13-2007 01:31 PM  10 years agoPost 7
red_z06

rrProfessor

Dumont, NJ

My Posts: All  Forum  Topic

One side of the ball becomes flat from wear. This happens within 50-70 flights and that is much shorter than steel balls.

www.JustinJee.com

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
09-13-2007 09:27 PM  10 years agoPost 8
zx12r00

rrNovice

Australia

My Posts: All  Forum  Topic

will futaba 3150's fit on the cyclic ?

PM  EMAIL  Attn:RR
09-16-2007 06:39 AM  10 years agoPost 9
E - 4

rrNovice

Australia

My Posts: All  Forum  Topic

well my Beam E4 arrived

having fun building it
neu1107/1.5 in the mail

servos and gyros will be ordered next
its a very nice looking heli indeed
everything has gone together perfect

PM  EMAIL  Attn:RR
09-16-2007 06:42 AM  10 years agoPost 10
E - 4rrNovice - Australia - My Posts: All  Forum  Topic








yes the outer ring of the swash in that photo is upside down
ive fixed that up now

PM  EMAIL  Attn:RR
09-16-2007 07:13 PM  10 years agoPost 11
Kevin H.

rrApprentice

Elk Grove California

My Posts: All  Forum  Topic

Nice looking little heli. Should fly well, I tried to get one for our local funfly but they weren't available. When did you get yours?
Jagged Edge.

PM  EMAIL  GALLERY  Attn:RR
09-16-2007 11:22 PM  10 years agoPost 12
zx12r00

rrNovice

Australia

My Posts: All  Forum  Topic

singapore

google "Beam E4" + "available now" youll find it

its on special introductory rates

PM  EMAIL  Attn:RR
09-17-2007 01:04 AM  10 years agoPost 13
zx12r00rrNovice - Australia - My Posts: All  Forum  Topic

I wonder if they are all gonna be like this

Two complete tail rotor assembly's

thats gotta be worth a few bob ?

PM  EMAIL  Attn:RR
09-17-2007 01:19 AM  10 years agoPost 14
frebou

rrKey Veteran

Montreal / Canada

My Posts: All  Forum  Topic

I found RCE Hobby web site but i'm unable to order from them. Did you have to place order by email?

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
09-17-2007 01:21 AM  10 years agoPost 15
frebou

rrKey Veteran

Montreal / Canada

My Posts: All  Forum  Topic

Is it me or 550 s$ = 363$ US?!?!

Compared to a 500$+ kit for an align trex450 v2... Am I wrong?

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
09-17-2007 03:40 AM  10 years agoPost 16
zx12r00

rrNovice

Australia

My Posts: All  Forum  Topic

yes you have to order by email

the price is right
comes with nice main blades

PM  EMAIL  Attn:RR
09-17-2007 08:09 AM  10 years agoPost 17
E - 4rrNovice - Australia - My Posts: All  Forum  Topic

yes as stated you have to order by email

mines all finished now
servos and gyros next

have you ordered one zx12r ?


PM  EMAIL  Attn:RR
09-17-2007 05:36 PM  10 years agoPost 18
frebou

rrKey Veteran

Montreal / Canada

My Posts: All  Forum  Topic

Any video of them flying 3D from IRCHA?

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
09-18-2007 10:29 AM  10 years agoPost 19
zx12r00

rrNovice

Australia

My Posts: All  Forum  Topic

yehaaaaa my beam arrived in the mail today and im into it already

im gonna run the neu as well, hope i can find one
cc35
and maybe a hyperion 2200

it looks sweet

PM  EMAIL  Attn:RR
09-18-2007 06:30 PM  10 years agoPost 20
ammorrVeteran - Singapore - My Posts: All  Forum  Topic

here's mine

PM  EMAIL  Attn:RR
WATCH
 2 pages [ <<    <    ( 1 )     2     NEXT    >> ] 5870 views POST REPLY
Scorpion Power Scorpion Power
Helicopter
e-
BEAM
BEAM E4 › The Beam E4
 Print TOPIC  Make Suggestion 

 9  Topic Subscribe

Thursday, September 21 - 11:38 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online