RunRyder RC
 7  Topic Subscribe
WATCH
 1 page 835 views POST REPLY
Scorpion Power Scorpion Power
HelicopterAlignOther › 600n pro kit
09-12-2007 12:56 PM  10 years agoPost 1
kevin 20567

rrNovice

herts england

My Posts: All  Forum  Topic

just ordered my pro kit was wondering if theres any thing to look out for or any tips when building this kit or is it pretty straight forward

saw it - wanted it - threw a fit - got it

PM  EMAIL  Attn:RR
09-12-2007 01:03 PM  10 years agoPost 2
micknick

rrApprentice

united kingdom Rainham kent

My Posts: All  Forum  Topic

600n pro kit

Hi Kevin
When I built mine It was my first ever build and all the bags are numbered to open in sequence, don,t know if it was just mine but I noticed parts were missing from the contents of individual bags, would open the next bag and the missing part/s would be in there and this made the build more time consuming as I was paranoid I had mislaid the missing part.
All said and done though the build itself was straightforward and went together really well.

PM  EMAIL  GALLERY  Attn:RR
09-12-2007 01:04 PM  10 years agoPost 3
Helijost

rrApprentice

Pevely, MO - USA

My Posts: All  Forum  Topic

Yeah, upgrade the cooling fan before you put it togethere.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
09-12-2007 01:28 PM  10 years agoPost 4
dazzaster

rrKey Veteran

right next door to hell

My Posts: All  Forum  Topic

the most important one of all: make youre desision about installing a govenor before you build it, even if you dont intend on useing a govenor it might be a good idea to install a gv-1 sensor while building it this way if or when you change your mond is all you have to do is hook it up
darren

A.K.A 509

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
09-12-2007 01:45 PM  10 years agoPost 5
JuanRodriguez

rrProfessor

The Villages, Florida

My Posts: All  Forum  Topic

just ordered my pro kit was wondering if theres any thing to look out for or any tips when building this kit or is it pretty straight forward
Do a search.... you'll find plenty of reading material...

PM  EMAIL  GALLERY  Attn:RR
09-12-2007 05:12 PM  10 years agoPost 6
Anthony.L

rrElite Veteran

Seattle, WA

My Posts: All  Forum  Topic

Get a alum fan, either 3DX or Align. Don't mess around and get a good gov from the start, either the Multigov or ATG.

PM  EMAIL  GALLERY  Attn:RR
09-12-2007 05:27 PM  10 years agoPost 7
DS 8717

rrProfessor

Here wishing i was somewhere else

My Posts: All  Forum  Topic

Or CSM.....

YOU ONLY LIVE ONCE..IF YOU LIVE IT RIGHT THATS ALL YOU NEED

PM  EMAIL  GALLERY  Attn:RR
09-12-2007 07:51 PM  10 years agoPost 8
kevin 20567

rrNovice

herts england

My Posts: All  Forum  Topic

a little while back i purchased a kasama fan will that fit

saw it - wanted it - threw a fit - got it

PM  EMAIL  Attn:RR
09-12-2007 10:27 PM  10 years agoPost 9
syl

rrApprentice

Ireland

My Posts: All  Forum  Topic

Replace the stock fuel tubing with some thing better.
Canopy rubbers seem to go pretty quick also, maybe use raptor ones instead.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
09-12-2007 10:36 PM  10 years agoPost 10
Anthony.L

rrElite Veteran

Seattle, WA

My Posts: All  Forum  Topic

The newer gray canopy mounts work great with the nitro, no issues after several gallons. They are made out of a different material, not just color.

PM  EMAIL  GALLERY  Attn:RR
09-12-2007 11:17 PM  10 years agoPost 11
JAGNZ

rrProfessor

Auckland, New Zealand

My Posts: All  Forum  Topic

Put an upgraded one way in right at the start. Yours WILL lock, almost guaranteed. Most recommend the Boca unit. 3Dx or Align Metal Fan, mount the gov during the build, Infinavation Dampers (plus shim kit if using metal grips).

Oh yeah, as others have said, do not use the stock fuel tubing or canopy grommets. You may also choose to mount an extra frame brace or 2 and the 3Dx Canopy Standoffs as well but these are optional...

Darn, I keep adding to this, the 440mm flybar is a worthwhile upgrade and cheap. Add some Stubz and the cyclics are crazy fast.

That's it then go fly her hard.


Jason Greenwood

www.3dheli.co.nz

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
09-12-2007 11:57 PM  10 years agoPost 12
REGULATER

rrApprentice

Bakersfeild, CA

My Posts: All  Forum  Topic

Does any body have a part number for Boca one way bearing for the 660N I need to get a couple of them.

Thank's REGULATER

PM  EMAIL  GALLERY  Attn:RR
09-13-2007 12:00 AM  10 years agoPost 13
JAGNZ

rrProfessor

Auckland, New Zealand

My Posts: All  Forum  Topic

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
09-13-2007 12:14 AM  10 years agoPost 14
REGULATER

rrApprentice

Bakersfeild, CA

My Posts: All  Forum  Topic

Ha thank's Jag I will order a few set's

REGULATER

PM  EMAIL  GALLERY  Attn:RR
09-13-2007 12:19 AM  10 years agoPost 15
JAGNZ

rrProfessor

Auckland, New Zealand

My Posts: All  Forum  Topic

Any time.


Jason Greenwood

www.3dheli.co.nz

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
09-13-2007 12:47 AM  10 years agoPost 16
Wingman77

rrProfessor

Pulaski Tennessee

My Posts: All  Forum  Topic

what all happens when the one way goes out or "locks"??

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
09-13-2007 12:53 AM  10 years agoPost 17
JAGNZ

rrProfessor

Auckland, New Zealand

My Posts: All  Forum  Topic

Nothing catastrophic but it can cause issues with your governor and gyro, especially if it's slipping momentarily. It also uses up more power during autos since the engine is engaged all of the time and there is no 'free wheeling' of the auto hub. Mostly it's just a royal PITA because it can cause other niggling problems that you can never seem to track down...


Jason Greenwood

www.3dheli.co.nz

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
WATCH
 1 page 835 views POST REPLY
Scorpion Power Scorpion Power
HelicopterAlignOther › 600n pro kit
 Print TOPIC  Make Suggestion 

 7  Topic Subscribe

Sunday, September 24 - 1:22 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online