RunRyder RC
 12  Topic Subscribe
WATCH
 2 pages [ <<    <    ( 1 )     2     NEXT    >> ] 3310 views
Scorpion Power Scorpion Power
HelicopterAlignOther › Trex 600N One Way Bearing Problem Solution
09-11-2007 06:33 AM  10 years agoPost 1
LukeRC

rrNovice

San Diego

My Posts: All  Forum  Topic

The website is up and it is http://www.lukerc.com
This design uses a sprague bearing and a ball bearing
same as aurora's design. it is a direct fit kit to replace the stock
part. it only borrows the stock 5 gear screws and the spacer (shim)
I sent several kit out to both our local pilots such as Dickson Lopez and Ray Nemovi. Also Aaron Shell at RC Heli Mag.
Hope their reviews will be posted soon.

Here are some pictures:

The Actual Part:

The Back Side:

Compare to the stock part

Fit on the Gear

Back Side of the gear

Remember the shim

for more info call Luke at 619 519 9915 or goto website

[url=http://www.lukerc.com]

Solves the problems and improves performances

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
09-11-2007 08:32 AM  10 years agoPost 2
jadams

rrKey Veteran

East coast USA

My Posts: All  Forum  Topic

I know a picture is worth a thousand words but help a blind man out....what exactly did you do?

PM  EMAIL  GALLERY  Attn:RR  Quote
09-11-2007 01:12 PM  10 years agoPost 3
SPB

rrElite Veteran

Athens - Greece

My Posts: All  Forum  Topic

A 2nd blind man here. Maybe a comment next to the pictures so we can all understand what you are trying to show (tell) us?


Sotiris
myhelis.com Flying Team

PM  EMAIL  GALLERY  Attn:RR  Quote
09-11-2007 01:14 PM  10 years agoPost 4
helibaba

rrNovice

Connecticut

My Posts: All  Forum  Topic

Very nice work…

Looks like he has added two bearings (top? and bottom) to stabilize the one way.

Did you have to use a shorter one way to maintain the original stack height?

Albert G.

PM  EMAIL  GALLERY  Attn:RR  Quote
09-11-2007 02:36 PM  10 years agoPost 5
JRSandiego

rrNovice

san diego, ca

My Posts: All  Forum  Topic

Hey Gang..
I am fortunate enough to have been able to test this product...It is a sprague clutch one way bearing, which has a harden center sleeve just like the stock set-up, which is then supported by a bearing on the other side....
I have flown this set-up in both my heli's and have not had a lock up...(both kits I have locked up within the first gallon with the stock one-way) I have flown approximately a gallon thru both heli's since the installation and no visible vibrations or lock ups ...It is a direct bolt on to the main gear...The only thing you borrow from the stock set-up is the shim in between the tail drive gear and the main gear...You do need to fly it a few times to get it to move freely but this particular product does work....Dickson

PM  EMAIL  Attn:RR  Quote
09-11-2007 08:17 PM  10 years agoPost 6
Ken Filloon

rrVeteran

Highland, Michigan

My Posts: All  Forum  Topic

For that price I will stick with the HN6064 that seems to be working fine at the moment.

PM  EMAIL  GALLERY  Attn:RR  Quote
09-11-2007 08:32 PM  10 years agoPost 7
AndyH

rrKey Veteran

Rockledge, FL

My Posts: All  Forum  Topic

This thing is awesome! It's like a mini version of the one on the Aurora.. Beautiful - and the price ain't bad for what you get at all! How much are you willing to pay for a good one way???

This hobby is like Kryptonite to chicks!

PM  EMAIL  GALLERY  Attn:RR  Quote
09-11-2007 08:37 PM  10 years agoPost 8
tchavei

rrProfessor

Portugal

My Posts: All  Forum  Topic

boca bearing alone is $17... interesting indeed.

Tony


--------------------
"Perfection and patience usually walk side by side..."

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
09-11-2007 08:58 PM  10 years agoPost 9
BOOGIE

rrElite Veteran

LAFAYETTE LA

My Posts: All  Forum  Topic

How much weight does it add?

MSH USA / Lynx Heli Innovations

PM  EMAIL  GALLERY  Attn:RR  Quote
09-12-2007 03:08 AM  10 years agoPost 10
LukeRC

rrNovice

San Diego

My Posts: All  Forum  Topic

By the end of today Sep 11th, 07, I only have three units left.

For those of you pre-ordered, i have them still available.

The next bulk will be here in two weeks, and they are $59 each. There are no more pre-sale discount part anymore.

For those of you who received the part, please give me some comments..

LukeRC

Solves the problems and improves performances

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
09-12-2007 09:30 AM  10 years agoPost 11
SPB

rrElite Veteran

Athens - Greece

My Posts: All  Forum  Topic

I was blind but now I can see and I want one of these units.


Sotiris
myhelis.com Flying Team

PM  EMAIL  GALLERY  Attn:RR  Quote
09-15-2007 08:19 AM  10 years agoPost 12
ChrisW

rrApprentice

Bonsall, CA

My Posts: All  Forum  Topic

I got mine & love it!

I have 5 flights on mine so far & it has worked flawlessly...as a matter of fact it has "broken-in" after about 3 flights just as Luke said...It is now spinning free"er" than ever...It is spinning as free as what I've seen on high-end Hirobo machines.

Definitely a quality part...We will really know after some time.
-Chris

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
09-15-2007 03:01 PM  10 years agoPost 13
Ghostrider

rrElite Veteran

San Diego, CA

My Posts: All  Forum  Topic

Put 4 flights on mine yesterday and cant believe how smooth it feels. Well done Luke!

PM  EMAIL  GALLERY  Attn:RR  Quote
09-15-2007 10:05 PM  10 years agoPost 14
wolfcbr2003

rrApprentice

Washington

My Posts: All  Forum  Topic

Hello all. I am received my pair of 1 ways today.. Great machining.. Look forward to trying them out tomorrow and will report back to all of you also.

PM  EMAIL  GALLERY  Attn:RR  Quote
09-16-2007 12:43 AM  10 years agoPost 15
JeepCJ

rrKey Veteran

Pennellville NY ​(Syracuse Heli​Group)

My Posts: All  Forum  Topic

Luke, are these all set to install, or do they need to be lubed first?

Bob

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
09-17-2007 12:45 PM  10 years agoPost 16
Hillstreet

rrNovice

Marietta, Georgia ​USA

My Posts: All  Forum  Topic

Received mine last week, installed at the field and put 2-3 flights on it so far. No problems, quality looks excellent, and direct fit and replacement. I am excited about the possibility of this one-way issue being a thing of the past. I dont see how this spraque-type sealed bearing should ever fail the way it is supported, very similar in appearance to a automotive clutch pilot bearing. They last for hundreds of thousands of miles. Only time will tell. Sorry about pics but forgot before I installed it. Looks just like the others in the post though.

Golfer

PM  EMAIL  GALLERY  Attn:RR  Quote
09-17-2007 02:25 PM  10 years agoPost 17
JeepCJ

rrKey Veteran

Pennellville NY ​(Syracuse Heli​Group)

My Posts: All  Forum  Topic

I was able to get 4 flights on mine yesterday. Very nice, spins nice and free, and very smooth!!

Bob

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
09-18-2007 11:02 PM  10 years agoPost 18
wolfcbr2003

rrApprentice

Washington

My Posts: All  Forum  Topic

just to give an update have installed 1 of them but its been to darn windy to fly hope to test it out this weekend.

Marcus

PM  EMAIL  GALLERY  Attn:RR  Quote
09-18-2007 11:14 PM  10 years agoPost 19
ChrisW

rrApprentice

Bonsall, CA

My Posts: All  Forum  Topic

I put another 6 flights on mine so far (11 flights total)...& it just keeps getting more & more free...I have the belt drive tail & it really spins free...I can only imagine how the tube drive must be with this unit!
-ChrisW

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
09-29-2007 09:26 PM  10 years agoPost 20
UK Helinut

rrApprentice

Gloucestershire

My Posts: All  Forum  Topic

Fitted this unit to mine, I am now totally happy with my 600n.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 2 pages [ <<    <    ( 1 )     2     NEXT    >> ] 3310 views
Scorpion Power Scorpion Power
HelicopterAlignOther › Trex 600N One Way Bearing Problem Solution
 Print TOPIC  Make Suggestion 

 12  Topic Subscribe

Sunday, November 19 - 5:53 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online