RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 767 views POST REPLY
Scorpion Power Scorpion Power
Helicopter
e-
Thunder Tiger
Raptor E325 › Will GForce Flybar Cage work with TT Metal?
09-11-2007 03:35 AM  10 years agoPost 1
homerlex

rrApprentice

USA

My Posts: All  Forum  Topic

I have a pretty much all metal head (TT Parts). I am not real happy with the c-arms though. I had the threads on one of them strip out. I am considering getting a GForce flybar cage - does anyone know if it will fit properly with the TT metal parts?

PM  EMAIL  Attn:RR
09-11-2007 04:16 AM  10 years agoPost 2
dynodude

rrNovice

El Cajon, ca

My Posts: All  Forum  Topic

Yes, it will fit. Even though that is a G-Force head in the pic, it is a TT see-saw hub. However, a word of caution: I got rid of mine because there was to much slop and it was'nt very smooth where the cage contacts the hub. Pic 2 shows a modded flybar cage and see-saw hub from Micro heli, and it is much smoother, and my flybar can't hit my canopy now.

PM  EMAIL  GALLERY  Attn:RR
09-11-2007 01:21 PM  10 years agoPost 3
tim tompkins

rrVeteran

Boston, Georgia sw Ga. Thomas County

My Posts: All  Forum  Topic

I had one of them strip too easily as well. I got the G-force one and I like it. I just filed a very small amount of the inside to make enough clearance at the mixer screws. Looks much better than TT part.
TimT

PM  EMAIL  Attn:RR
09-18-2007 12:17 AM  10 years agoPost 4
homerlex

rrApprentice

USA

My Posts: All  Forum  Topic

I got the GForce cage and had to file just a tad as well. I like it much better than the C-arms

PM  EMAIL  Attn:RR
09-18-2007 04:48 AM  10 years agoPost 5
tim tompkins

rrVeteran

Boston, Georgia sw Ga. Thomas County

My Posts: All  Forum  Topic

I saw a picture of the latest g-force version and it has a straight ,flat bar in front. No more filing to fit. TimT

PM  EMAIL  Attn:RR
09-20-2007 10:38 PM  10 years agoPost 6
Liquidsky

rrNovice

Jakarta-indonesia

My Posts: All  Forum  Topic

I had my c cage stripped too, then i drilled it out with a 3.5mm drill bit and tap it 4mm, use 4mm set screw and now its like a gorilla grip. No intend to hijack ur post just a tip u may want to try bfore spending any more money. :-)

PM  EMAIL  Attn:RR
WATCH
 1 page 767 views POST REPLY
Scorpion Power Scorpion Power
Helicopter
e-
Thunder Tiger
Raptor E325 › Will GForce Flybar Cage work with TT Metal?
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Sunday, September 24 - 9:36 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online